User manual GRUNDIG MS 6040

[. . . ] This does not apply to the latter if they were instructed in the use of the appliance or if they use it under the supervision of a person responsible for safety. Children should always be supervised to ensure that they do not play with the appliance. No warranty claims are accepted for damage caused by improper handling. 7 7 7 7 7 After charging, pull out the power supply unit. [. . . ] Do not charge them every day. 7 7 to switch off 7 2 Plug the power cord into the appliance socket J and the power supply unit into the wall socket. ­ When the appliance is fully charged, the indicator I lights up green. 3 Pull the power cord out of the the appliance socket J and the power supply unit out of the wall socket. ENGLISH 5 USE -------------------------------------------------------------------------------------------------------------------------------------------------Shaving 1 Remove the plastic protective cap A . 2 Press the button the appliance. H Trimming Use the extended trimmer for longer hair on your face and neck, but also on the beard, moustache or sideburns. 1 Press the button the appliance. H to switch on C to switch on 2 Push up the trimmer latches in. until it C 3 Shave with slow, gentle movements against the direction of beard growth. 4 After use, switch off the appliance with the switch H and put the plastic cap back on. 3 After use, push the trimmer back down. Useful tips 7 Always pull the skin taut when shaving difficult areas such as your lower jaw. In the case of thick or copious beard growth which cannot be removed by just one shave, do one quick shave and then a more thorough second one. 7 7 6 ENGLISH CLEANING AND CARE ---------------------------------------------------------------------------General information The device must be cleaned regularly so that you can continue to enjoy its top performance and optimum results. Do not use any cleaning agents. Cleaning with water 1 Press the H button to switch off the device. 2 To remove the foil frame, press on one of the side catches with your thumb D to lift up this side of the foil frame. Then press the second catch on the other side and lift up the foil frame. 3 Rinse out the foil frame running water. B 5 Gently shake out the remaining moisture and then dry off the device with a clean cloth. 6 Replace the foil frame it latch into place. B and let under 4 To remove all hairs, hold the blade blocks E under running water and switch on the appliance. ENGLISH 7 CLEANING AND CARE ---------------------------------------------------------------------------Cleaning with the brush 1 Use the button the appliance. H to switch off Replacing the cutting foils and blade blocks You can replace the cutting foils and the blade blocks. The appropriate replacement shaving system (containing two blade blocks and one foil frame) is article number MSR 58. Replacing the cutting foils 1 Use the button H to switch off the device. 2 To remove the foil frame, press on one of the side catches D with your thumb to lift up this side of the foil frame. Then press the second catch on the other side and lift up the foil frame. Caution 7 Ensure that the foil frame is firmly in position and cannot move within the housing. 2 To remove the foil frame, press on one of the side catches D with your thumb to lift up this side of the foil frame. Then press the second catch on the other side and lift up the foil frame. [. . . ] This is indicated by this symbol on the product, in the operating manual and on the packaging. Technical data This product conforms to the European directives 2004/108/EC, 2006/95/EC and 2009/125/EC. Power supply 100 - 240 V~, 50/60 Hz Batteries: Nickel metal hydride Power adapter Ni-MH Washable (IPX4) Suitable for cleaning under an open water tab. WARNING: Detach the handheld part from the supply cord before cleaning it in water. [. . . ]