User manual GRUNDIG MS 5840 HERRENRASIERER XACT5, AKKU/N

[. . . ] The appliance may only come into contact with water once it is disconnected from the power supply unit and the power supply unit is no longer in the socket. No warranty claims are accepted for damage caused by improper handling. 7 7 7 7 7 7 7 7 After charging, pull out the power supply unit. Always keep the power adapter dry. 7 14 ENGLISH OVERVIEW ---------------------------------------------------------------------------------------------------------------------Dear customer, Congratulations on the purchase of your MS 5840 men's shaver. [. . . ] ­ When the appliance is fully charged, the indicator I lights up green. 3 Pull the power cord out of the the appliance socket J and the power supply unit out of the wall socket. 16 ENGLISH USE -------------------------------------------------------------------------------------------------------------------------------------------------Shaving 1 Remove the plastic protective cap A . 2 Press the button the appliance. H Trimming Use the extended trimmer for longer hair on your face and neck, but also on the beard, moustache or sideburns. 1 Press the button the appliance. H to switch on C to switch on 2 Push up the trimmer latches in. until it C 3 Shave with slow, gentle movements against the direction of beard growth. 4 After use, switch off the appliance with the switch H and put the plastic cap back on. 3 After use, push the trimmer back down. ENGLISH 17 USE -------------------------------------------------------------------------------------------------------------------------------------------------Useful tips 7 Always pull the skin taut when shaving difficult areas such as your lower jaw. In the case of thick or copious beard growth which cannot be removed by just one shave, do one quick shave and then a more thorough second one. 7 7 18 ENGLISH CLEANING AND CARE ---------------------------------------------------------------------------General information The device must be cleaned regularly so that you can continue to enjoy its top performance and optimum results. Do not use any cleaning agents. Caution 7 The appliance must be disconnected from the power unit. 5 Press the H button to switch off the device after rinsing. 6 Gently shake out the remaining moisture and then dry off the device with a clean cloth. 7 Replace the foil frame it latch into place. B Cleaning with water 1 Press the H button to switch off the device. 3 Rinse out the foil frame running water. B and let under 4 To remove all hairs, hold the blade blocks E under running water and switch on the appliance. ENGLISH 19 CLEANING AND CARE ---------------------------------------------------------------------------Cleaning with the brush 1 Turn the appliance off and remove the foil frame B . 2 Remove the E blade blocks for cleaning by pulling them upwards off the oscillator F . 3 Carefully brush hair clippings out of the blade blocks, the foils and the housing. Caution 7 To ensure smooth operation, the foil frame must sit exactly in the housing. Never take the foils out of the frame. Storage If you do not want to use the appliance for a long period of time, please store it carefully. [. . . ] Therefore, do not dispose of the product along with normal household waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by this symbol on the product, in the operating manual and on the packaging. Technical data This product conforms to the European directives 2004/108/EC and 2006/95/EC. [. . . ]