User manual GRUNDIG GV 740 SV HIFI NOIR

[. . . ] VIDEORECORDER GV 740 HiFi TIMER Recording 23-28 The Remote Controls 6-8 The RP 7 Compact Remote Control . 7-8 Programming with the teletext pages of TV stations, variant 2 . 28 The User Guide Settings Tuning the TV set to the recorder 9 10-15 10-11 Teletext Mode Copying from a second recorder, camcorder, CD-i player Insert-Splice Functions 29-30 31 32-33 Tuning TV stations 12-15 Transfer of data from the TV set (download with Megalogic function) . 12 Tuning to TV stations with the automatic tuning system (ATS euro plus) . [. . . ] If the recorder is connected to a TV set with Megalogic functions, the TV set switches itself on when the > SV/V+ is pressed and the AV programme position is displayed automatically. 2 0-9 : Enter number : ED/EW/Normal CLEAR : Delete last digit SV/V+ : New input OK : Confirm number i : Return Use the numbered buttons 1 . . . If incorrect entries are made, the > CLEAR button can be used to delete the last digit of the ShowView number. The complete ShowView number can be deleted using the > SV/V+ button. 3 Insert a cassette with sufficient playing time, pay attention to erase prevention. ­ The recorder converts the ShowView number into the actual recording data. GRUNDIG TEXT-PROGRAMMING Timer I I I I I I Prog. Start 22:30 --:-Stop 23:00 --:-- * +/­ : Enter timer data : VPS/PDC Off/On : ED/EW/Normal LP/CL : Long play / Clear timer VPT : Program with TEXT OK : Activate timer i : Return to Info menu 4 Confirm programming using the G button. ­ The data of the programme is stored at the first memory position (TIMER). All drive mechanism functions of the recorder are now "blocked". To programme further TV programmes first press the > TIMER ON/OFF button then repeat the procedure ! ! 24 Additional functions The entries for these functions must be selected according to step 3 of the example. ­ If the recording is to be made without VPS/PDCcontrol, press the > VPS/PDC (red) button. ­ If the programme is to be recorded daily or weekly at the same time, press the Z ED/EW (green) button once or twice. The function "daily" cannot be used for recordings on Saturday or Sunday. ­ If the recording is to be made in long-play mode, press the ¢ SP/LP button. ­ The data can be altered using the B PROGRAM, B DAY, B START, B STOP buttons. ShowView programming with a satellite receiver is described on page 40. Record length No cassette Display: » No cassette « » CASS «. There is no cassette in the recorder. Cassette protected Display: » Cassette protected « » PROTEC «. It is ejected automatically. Collision Display: » Collision « » COLL «. Change the entry data for the TIMER position. ! Setting a programme position for the ShowView system If the recorder display flashes » A 2 « and the message » Select programme « appears in the table, the recorder has not found the TV station programme position. The required station identification must be selected in the » Prog. « column with the B PROGRAM button (for example BBC) and confirmed using the G button. The setting does not have to be repeated for any further TIMER recordings from this programme position. Code error Display: »Code Error!« » CODERR «. Indicates incomplete entry, or the ShowView number in the TV magazine is incorrect. ED error Display: » ED not possible « » ED-ERR «. [. . . ] The recorder cannot be operated, the mains supply is o. k. Cause Mains plug disconnected or poor contact. Remedy Insert mains plug or use a different supply socket. Keep the , button pressed down until the display » 20:00 « appears on the recorder. Please note that this causes all settings ­ including programme positions ­ to be deleted. Tune to station. The electronic combination lock is activated. Recording of TV programmes not possible (only snow on the picture screen). Aerial cable not connected. [. . . ]