User manual GRUNDIG GDP 4300

[. . . ] Connecting to a TV with Audio/Video Cable Connecting to a TV with Scart Cable Connecting to a Audio System and TV Equipped with YUV Video Input Connecting to an Amplifier Equipped with a Digital Audio Input and TV The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture, dangerous high voltages are present inside the enclosure. do not open the cabinet , refer servicing to qualified personnel only. CAUTION: When replace the direct plug in power supply or a separable, cord-connected power supply, the replacement must be exact duplicate, or one recommended by the manufacturer. [. . . ] When you want to view a disc, turn on the TV and select the video input connected to the DVD player. Press »POWER« switch on the front panel to ON, the DVD player turns on and the TV screen will display the start logo. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. ⷠDo not place a disc which is unplayable in this DVD player. Some discs may not playback automatically, you can press PLAY » « button to start playback. Some discs may start playback with a menu, use the cursor button on the remote control to select menu options and press PLAY to start, or press digits to select a menu options directly. As some disc the player can recall the location where stopped, such as DVD. Press »PLAY« to playback to resume playback from the location where playback is stopped or from the beginning of the disc. Each time the » « button is pressed, the fast forward motion speed changes. Each time » « the button is pressed, the fast reverse motion speed changes. Notes: » « may appear on the TV screen during operation. A » « means that the operation is not permitted by the unit or the disc. Important Note: The following functions are applicable only to DVD discs. If other disc formats are played, screen display and operation will be different. This button can set VIDEO output among "CVBS", "YUV(CVBS)", "P-Scan", "RGB(CVBS)". Note: The screen disappear when press this button, press this button continuously until the screen turn normal. If there are picture interferences or no picture, please press »V. Press this button and the screen will display some information about disc, such as : " Title Elapsed " , " Title Remain ", " Chapter Elapsed ", " Chapter Remain " and " Display Off ". Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. According to some DVD discs, press this button will display "Title Menu", the unit will play from the disc head or you can use digits to select tracks preferred. According to some SVCD and VCD, following the menu screen on the TV screen, On this playing, the user can use the digits buttons enter, during PBC playback. Press this button and the screen display menu, then press digits button into menu, for example: Follow this operation : first twice third Title 02/10 Chapter Title 02/10 Time Chapter 01/32 Time :: :: /32 According to operation, you could choose point that you want to play. [. . . ] If there are picture interferences or no picture, please press »V. Press »LEFT/RIGHT« button to adjust, then press »ENTER/PLAY« button to confirm and return upon menu. Press »LEFT/RIGHT« button to adjust, then press »ENTER/PLAY« button to confirm and return upon menu. Press »LEFT/RIGHT« button to adjust, then press »ENTER/PLAY« button to confirm and return upon menu. [. . . ]