User manual GRUNDIG DTR 1560-2 MICRO

[. . . ] DIGITAL SATELLITE RECEIVER DTR 1560-2 MICRO CONTENTS ____________________________________________ 4 4 4 4 General information Packing contents Receiving digital stations Special features of your digital receiver 5 6-7 6 6 7 Set-up and safety Overview The digital receiver The infrared receiver The remote control 8-9 8 8 8 9 9 Connection and preparation Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the mains adapter Inserting batteries in the remote control 10-13 10 11 12-13 Upgrading the television Connecting the GRUNDIG television with G2 chassis (Digi 200) Installing on the GRUNDIG television set Operating the GRUNDIG television remote control 14-17 14 15-16 17 Basic settings The menu Searching for stations Editing the station list 18-20 18 18 18 18 19 19 19 19 20 Basic functions Switching on and off Mode selection Selecting preset channels Using the options Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one TV guide 21 21 21 Teletext mode Teletext Additional functions 22-27 22-23 23-24 25-26 26-27 Settings Picture settings Language Settings Menu settings General settings 2 CONTENTS ____________________________________________ 28-31 28 29 30 31 Additional functions Automatic station search Manual station search Timer functions Safety 32-33 32 32 33 Special settings Resetting the receiver to its original state Updating the digital receiver software Changing remote control levels 34-37 34 34 35 35 36 37 Information Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting Additional Information for units sold in the UK. ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 7 DTR 1560-2 MICRO Digital Satellite Receiver Tele Pilot 766 S remote control Two batteries for the remote control (2 x 1. 5 V, Mignon, e. g. UM-3 or AA) Euro/AV (Scart) extension Mains adapter Infrared receiver Instruction Manual Receiving digital stations To use your new DTR 1560-2 MICRO digital receiver you need a digital outdoor or indoor antenna. Unlike analogue broadcasting, not every station has its own transmission frequency. Instead, several stations are grouped into what are known as bouquets on a regional or national level. [. . . ] Press » « or » « to adjust the setting. Selecting the standard setting You can reset the screen settings back to the default settings (factory settings) with this function. 1 Select »Restore Default Settings« with »P-« or »P+« and press »OK« to confirm. Ending the settings 1 Press »i« to finish the setting. Language settings 1 2 Press »i« to open the main menu. Select »Box Settings« by pressing »P+« or »P-« and press »OK« to confirm. Select »Language Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. 3 Setting the menu language 1 2 Select »Menu Language« with »P-« or »P+«. Press » « or » « to select the language. Selecting the preferred audio language You can set a preferred language for all programmes. 1 2 Select »Audio Language« with »P-« or »P+«. Press » « or » « to select the language. 23 ENGLISH SETTINGS ______________________________________________ Selecting a second audio language If the programme is not broadcast in the language selected in »Audio Language«, the »Audio Language #2« is used. 1 2 Select »Audio Language #2« with »P-« or »P+«. Press » « or » « to select the language. Selecting the subtitle language You can select the language for the subtitles. 1 2 Select »Subtitle Language« with »P-« or »P+«. Press » « or » « to select the language. Selecting the second subtitle language If the subtitles are not broadcast in the language selected in »Subtitle Language«, the »Subtitle Language #2« is used. 1 2 Select »Subtitle Language #2« with »P-« or »P+«. Press » « or » « to select the language. Automatic subtitles You can set the subtitles so that they automatically appear when they are transmitted in the selected subtitle language. 1 2 Select »Subtitles Automatic« with »P-« or »P+«. Press » « or » « to switch this function on or off. Ending the settings 1 Press »i« to finish the setting. 24 SETTINGS ______________________________________________ Menu settings 1 2 Press »i« to open the main menu. Select »Box Settings« by pressing »P+« or »P-« and press »OK« to confirm. Select »Menu Settings« by pressing »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. 3 Info banner display duration You can determine how long the info banner is displayed when you switch stations. Select »None« if you do not want the info banner to appear. 1 2 Select the »Info Banner Duration« display duration with »P-« or »P+«. Press » « or » « to select the duration. Automatic info banner You can determine whether the info banner should be displayed when a new programme starts. [. . . ] Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. [. . . ]