User manual GRUNDIG DSR 1773 CY

[. . . ] DIGITAL SATELLITE RECEIVER DSR 1773 CY CONTENTS 4-5 4 4 5 General information Packing contents Receiving digital stations Special features of your digital receiver 6 7-8 7 7 8 Set-up and safety Overview The digital satellite receiver The infrared receiver The remote control 9-11 9 9 10 10 10 11 11 Connection and preparation Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the power supply unit Inserting batteries in the remote control Inserting a Smart card Connecting the Dolby Surround system 12-19 12 13 14 15-16 17-19 Basic settings The menu Initial setup Settings stations, Option 1 Settings stations, Option 2 Editing favourites lists 20-22 20 20 20 20 21 21 21 21 21 22 Basic functions Switching on and off Mode selection Selecting presets Selecting stations from lists Switching from the current station to the previous one Adjusting the volume Muting the sound Displaying the time Using options Electronic TV Guide 23 23 23 Teletext mode Teletext Additional functions 24-31 24-25 26-27 28-29 30-31 Settings Picture settings Language settings Menu settings Miscellaneous settings 2 CONTENTS ____________________________________________ 32 33-34 33 34 The recording timer Additional functions Security functions Conditional access 35-39 35-36 37 38 38 39 Special settings Searching for new stations LNB settings Resetting the digital receiver to its original state Updating the digital receiver software Changing remote control levels 40-42 40 40 41 41 42 Information Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents Digital Satellite Receiver DSR 1773 CY Tele Pilot 766 S remote control with 2 batteries SCART extension cable Power supply unit Infrared receiver Operating manual Receiving digital satellite channels In order to use your new DSR 1773 CY digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the satellites (for example Astra and EutelSat/Hotbird). Unlike broadcasts of analog satellite channels, not every digital TV or radio station is assigned to one transmission frequency, but several TV and/or radio stations are broadcast by one transponder. To help you with the choice and settings for satellite channels, a selection of TV and radio stations have already been programmed for this device. You can start a channel search to ensure that any new satellite channels are available on your device. [. . . ] ­ »Pillarbox« for 4:3 picture playback with black bars at the left and right of the television screen. The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. 1 2 Select »Picture Scaling« with »P-« or »P+«. Press » « or » « to select the setting. Setting the video signal at the SCART (TV) output You can choose between »Video (FBAS)« (normal picture quality), »RGB« (high picture quality) or »S-Video« (Y/C). 1 2 Select »TV Output Format« with »P-« or »P+«. Select the video signal by pressing » « or » «. 24 SETTINGS ______________________________________________ Selecting AFD The transmitted screen format can differ from the displayed screen format. 1 2 Select »AFD Automatic« by pressing »P-« or »P+«. Press » « or » « to switch AFD on or off. Teletext With this function you can select whether teletext should be displayed on the receiver of the television. 1 2 Select »Teletext« with »P-« or »P+«. Press » « or » « to select the setting. Selecting the standard setting You can reset the screen settings back to the default settings (factory settings) with this function. 1 2 Select »Restore Default Settings« with »P-« or »P+« and press »OK« to confirm. Using » «, set the security query to »Yes« and confirm this with »OK«. Ending the settings 1 Press »i« to finish the setting. 25 ENGLISH SETTINGS ______________________________________________ Language settings 1 2 Press »i« to open the main menu. Select »Box Settings« with »P+« or »P-« and press »OK« to confirm. Select »Language Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. 3 Setting the menu language 1 2 Select »Menu Language« with »P-« or »P+«. Press » « or » « to select the language. Selecting the preferred audio language You can set a preferred language for all programmes. 1 2 Select »Audio Language« with »P-« or »P+«. Press » « or » « to select the language. Selecting a second audio language If the programme is not broadcast in the language selected in »Audio Language«, the »Second audio language« is used. 1 2 Select »Audio Language #2« with »P-« or »P+«. Press » « or » « to select the language. Select the subtitle language You can select the language for the subtitles. 1 2 Select »Subtitle Language« with »P-« or »P+«. Press » « or » « to select the language. 26 SETTINGS ______________________________________________ Selecting the second subtitle language If the subtitles are not broadcast in the language selected in »Subtitle language«, the »Second subtitle language« is used. [. . . ] ­ This contains information on the product designation, the hardware version and the software version. Press »i« to quit the menu. 4 40 INFORMATION_____________________________________ Technical data This product fulfills the European directives 2004/108/EEC and 2006/95/EEC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. TV/radio stations: Predefined satellites: Reception area: Input symbol rate: SAT IF input: LNB supply: LNB switching signal: DiSEqC: OSD: Search: Last station memory: Teletext, VPS: Software download: Mains supply: Power consumption: Ambient temperature: Dimensions: Weight: 4000 in total 9 950 ­ 2150 MHz 1-45 megasymbols per second (SCPC & MCPC) 1 F connector 14 V/18 V, max. [. . . ]