User manual GRUNDIG DSR 1510

[. . . ] DIGITAL SATELLITE RECEIVER DSR 1510 DEUTSCH ENGLISH CONTENTS ____________________________________________ 4 4 4 5 General information Packing contents Digital satellite reception Special features of your digital receiver 6 7-9 7 8 9 Set-up and safety Overview The front of the digital receiver The back of the digital receiver The remote control 10-11 10 10 10 11 11 11 11 Connection and preparation Connecting the satellite antenna Connecting the television Connecting a video recorder Connecting an AV receiver or hi-fi system Connecting a digital multi-channel amplifier Connecting the power cord Inserting batteries in the remote control 12-21 12 13 14 15 16 17-18 19 20-21 Settings The menu Assigning preset stations Editing the station list Editing the list of favourite stations Setting the local time Adjusting the digital receiver to the television set Adjusting the digital receiver to the LNB configuration of the satellite antenna Audio settings 22-24 22 22 22 22 23 23 23 24 24 Basic functions Switching on and off Mode selection Selecting preset channels Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one TV Guide Subtitles 25-26 25 25-26 Teletext mode Teletext Additional functions 2 CONTENTS _________________________________________________ 27-31 27 27 28 28 29 30-31 Additional functions Setting the menu language Deleting stations automatically Preset satellite stations Automatic station search Manual station search Timer functions 32-33 32 32 33 Special settings Resetting the digital receiver to its original state Updating the digital receiver software Selecting the remote control level 34-36 34 34 34 35 35 36 Information Displaying station reception properties Displaying device information Connecting the digital receiver to a PC Technical data Environmental note Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 DSR 1510 Digital Satellite Receiver Tele Pilot 766 S remote control Two batteries for the remote control (2 x 1. 5 V, Mignon, e. g. UM-3 or AA) Euro/AV (Scart) cable Power cord Operating manual Digital satellite reception In order to use your new DSR 1510 digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the required satellites (for example Astra and EutelSat/Hotbird). Unlike analogue satellite broadcasting, digital TV or radio stations are not all assigned their own frequencies; instead, several TV and/or radio are "transmitted" by a single transponder. To help you with the choice and settings for satellite stations, a selection of TV and radio stations have already been programmed for you. [. . . ] 1 2 Select »Audio output« by pressing »P-« or »P+« and press »OK« to confirm. Press »P-« or »P+« to select the setting and press »OK« to confirm. s s s s s s s Select and confirm Back 20 SETTINGS _________________________________________________ Volume adjustment Audio settings Audio channel Audio output Volume adjustment Digital output English Stereo s You can set the standard volume here. 1 ss Select »Volume adjustment« by pressing »P-« or »P+« and press »OK« to confirm. Press » « or » « to set the level and press »OK« to confirm. s s s s s s s PCM Format 2 Modify Back and confirm Ending the settings 1 Press »i« and then »OK« to end the settings. 21 ENGLISH BASIC FUNCTIONS______________________________ Switching on and off 1 2 Press » « to switch on the digital receiver from standby mode. ­ The mode indicator lights up red. Mode selection You can choose between TV and radio modes. 1 Press » TV « or » Radio « to select the mode. Note: You can also change modes by selecting »Program information« in the main menu. Selecting preset channels 1 2 3 Move up and down the channels by pressing »P+« or »P-« as required. To run through the channels, press and hold down »P+« or »P-«. Enter single-digit or multi-digit preset channel numbers by pressing »1 . . . Note: Every time you switch stations, the current channel number, the name of the station, the time, and the titles, start and finish times of the current and following programmes are shown on the screen If there is another language or digital audio effects for the current programme, you will also see this information. In the »Sound« menu, you can choose the language or the digital audio effects. Open the »Sound« menu by pressing »F«. Adjusting the volume You cannot change the volume in menu mode. Note: Volume changes adjust the audio signals at the »TV«, »VCR« and »AUDIO OUT« sockets on the digital receiver. 22 BASIC FUNCTIONS ______________________________________ Muting the sound 1 2 Press »d« on the remote control to mute the sound. Press »d« on the remote control to switch the sound on again. ­ You can hear the sound at the volume previously set. Selecting stations from lists You can select stations from various lists (e. g. To change the station list, press »?« and press »P-« or »P+« to select the list you want. Press »P-« or »P+« to select the station and press »OK« to call it up. Press »i« to quit the station list. Switching from the current station to the previous one The digital receiver remembers the station which was last selected, provided it was selected for at least one second. 1 2 Press »z« to switch from the current station to the previous one. Note: You can only switch over when no menu is shown on the screen. 23 ENGLISH BASIC FUNCTIONS ______________________________________ TV guide The TV guide provides information on the current station such as the title and descriptions of the current and next programmes. 1 TV Guide 9:15 - 9:30 9:30 - 10:00 10:00 - 10:18 10:18 - 10:34 10:34 - 11:00 11:00 - 11:31 11:31 - 12:00 12:00 - 12:20 12:20 - 12:39 12:39 - 13:00 Press »TV-G« to view the station information. Note: The TV guide can also be found under »Program information« in the main menu. Monday, 11. 07. 2005 Börse&Wirtschaft N24 Wissen N24 Nachrichten N24 Nachrichten Wirtschaft Doku: Raketen N24 Nachrichten Doku: Raketen N24 Nachrichten N24 Nachrichten Wirtschaft Doku: Von der Macht verführt Back Timer Exit 2 3 4 5 Press »P-«, »P+«, » « or » « to select the programmes. [. . . ] In the »Reception parameters« menu, press »P-« or »P+« to change stations. The lower the number of »Bit error Rate« displayed (the optimum value is »0«), and the further the »Level« bar extends to the right, the better the reception signal. The signal level not only depends on the settings of your receiver unit, but also on the channel which is currently active. Remember this when aligning your antenna using the signal level display. 3 Frequency: Symbol rate: Polarisation: Bit error Rate: Reception: S/N: 13 Level: 254 4 Select Channel Back Exit 5 Press »i« to quit the menu. Displaying device information System information DSR 1510 Manufacturer Hardware Software Remote control GRUNDIG V. [. . . ]