User manual GRUNDIG BEEZZ RRCD 4101

[. . . ] The CD part contains self-lubricating bearings, which must not be oiled or greased. No warranty claims are accepted for damage caused by incorrect handling. Even if the device is switched off, it can be damaged by a lightning strike to the mains. Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. [. . . ] When inserting the battery (3 V, lithium) ensure that the positive terminal (+) faces upwards and the buttons of the remote control are facing downwards. Push the battery holder back into the remote control until it latches into place. Note: If the device no longer reacts properly to remote control commands, the battery may be flat. The manufacturer accepts no liability for damage resulting from leaking batteries. Environmental note: Batteries, including those which contain no heavy metal, should not be disposed of with household waste. Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area. 32 CONNECTION AND PREPARATION ___________ Additional information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries. This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. In case this appliance is supplied with a moulded 2-pin Euro plug only, which is unsuitable for UK operation, this must be cut off and immediately disposed of. Open the CD compartment with the »Open« sliding switch and remove the CD. Close the CD compartment. 2 3 4 5 6 37 ENGLISH CD MODE ________________________________________________________ Selecting a track 1 During playback, keep pressing »8« or »9« until the number of the track you want to hear appears in the display. However, you must then start playback of the track with » II«. Searching for a passage within a track 1 During playback, press »8« or »9« and hold it down until you find the passage you want to hear. ­ If »8« or »9« are released, playback starts. Note: During the search the volume is reduced. Repeating a track (Repeat One) 1 Press »MODE« once. To quit the function, press »MODE« on the device until all the repeat symbols and »RANDOM« disappear from the display. 2 Repeating all tracks (Repeat All) 1 Press »MODE« twice. To quit the function, press »MODE« on the device until all the repeat symbols and »RANDOM« disappear from the display. 2 Playing back tracks in random order 1 2 Press MODE repeatedly until »RANDOM« appears in the display. Note: You can select the Repeat and Random functions during playback and in stop mode. Start playback in stop mode by pressing » II«. 38 CD MODE ________________________________________________________ Creating a track memory You can create a track memory of up to 20 tracks for the current CD in any order you choose and then play them back in that sequence. Programming is only possible in stop mode. Selecting and storing tracks 1 Press »PROG. « to call up the function. ­ Display: »PO1« for the first preset position and »MEMORY«, »00« for the track to be saved. [. . . ] Keep pressing »MODE« until all the repeat symbols and »RANDOM« disappear from the display. Playing back files in random order (Random) 1 2 Keep pressing »MODE« until »RANDOM« appears in the display. Note: You can select the Repeat and Random functions during playback and in stop mode. Start playback in stop mode by pressing » II«. 41 ENGLISH MP3/WMA MODE_________________________________________ Creating a track memory You can store and then play back up to 20 titles from various albums on the disc in a set order. Programming is only possible in stop mode. Selecting and storing files 1 Press »PROG. « to call up the function. [. . . ]