User manual GRUNDIG 40VLE8060BX

[. . . ] LCD TV 40 VLE 8060 BX EN Contents------------------------------------------------------------------------------------------------------------------------------------4 Setup AND SAFETY 6 6 7 7 7 8 8 9 General information Special features of your ­elevision set t Receiving digital channels Important notes on environmental protection Notes on still images Connection and preparation Connecting the antenna and power cord Inserting batteries into the ­ emote control r 29 SMART Inter@ctive TV AND HOME NETWORK 29 What is Smart Inter@ctive TV 29 Network connection 29 Wired network 35 Smart Inter@ctive TV internet applications 37 Playback the video, music and image files with home network connection 38 vTuner internet radio 39 USB RECORDING 39 Information on recording and playing television programmes 39 Possible limitations when using an external data medium 40 Connecting external data media 40 Settings for USB recording 42 ″Pausing” time shift programmes 42 Recording programmes 43 Presetting programmes to be recorded 45 Playback 45 Deleting programmes in the recording list 46 USB OPERATION 46 File formats 47 Connecting external data media 48 The file browser 48 Settings in the USB setup menu 49 Basic playback functions 50 Additional playback functions 52 Teletext OPERATION 52 TOP text or FLOF text mode 52 Additional functions 53 INTERACTIVE PORTAL (HbBTV) 53 What is HbbTV?53 Additional functions for video sequences 54 54 54 55 55 56 57 57 57 Convenience functions Opening the SETTINGS menu Language settings Setting the date and time Timer settings Parental control settings Updating software (OAD) Updating software (Online) Restoring the television to the default settings 10 Overview 10 Connections on the television set 11 Controls on the television set 12 The remote control – Main functions 13 The remote control – All functions 14 Settings 14 Initial set-up and tuning ­elevision t channels 14 Selecting language, country and operating mode 15 Tuning terrestrial television channels (DVB-T) 15 Tuning television channels from the cable provider (DVB-C) 16 Changing the program table for the digital channels 19 Picture settings 20 Sound settings 22 Television - OPERATION 22 Basic functions 23 Zoom function 23 Eco mode 24 Zapping function 24 Electronic TV guide 25 Changing the picture format 26 3D FUNCTION 26 Important information about the 3D function 26 Preparing the 3D function 27 3D Settings 2 ­ ENGLISH Contents------------------------------------------------------------------------------------------------------------------------------------58 OPERATION USING EXTERNAL DEVICES 58 DIGI LINK 58 The DIGI LINK functions on your television 59 Device operation 60 High definition ­ HD ready 60 Connection options 61 Connecting external devices 62 Using a DVD player, DVD ­ ecorder, r video recorder or set-top box 62 Headphones 63 Hi-fi system/AV receiver 64 OPERATION AS A PC MONITOR 64 Connecting a PC 64 Selecting presets for the PC 64 Settings for PC mode 65 Operation with a Common Interface 65 What is a Common Interface?65 Inserting the CA module 65 Access control for CI module and smart card 66 Special settings 67 Searching for digital terrestrial TV channels automatically 68 Searching for digital terrestrial TV channels manually 69 Tuning analogue television ­ hannels c 70 Changing stored analogue ­ hannels c 72 INFORMATION 72 Displaying signal information 73 Technical data 74 Service information for dealers 74 Environmental note 75 Troubleshooting ENGLISH 3 ­ Setup AND SAFETY-----------------------------------------------------------------------------------------------------Please note the following instructions when setting up the television set: 7  7  Make sure the power cord or the power supply unit (if provided) are not damaged. Only operate the television with the power supply/power cord provided. This television is designed to receive and display video and audio signals. [. . . ] not suitable for minors will require the input of a PIN number immediately before recording starts. If this authorisation is not given, the recording may not start. ■  rogrammes P ■  eception R ■  opying C ■  rundig G a programme from a digital television channel onto a video or DVD recorder using the »AV 1« socket (analogue picture/ sound signal) can also be restricted by the broadcaster. Prerequisite is that your device supports the copying function. 3 ENGLISH ­ 9 USB RECORDING- ------------------------------------------------------------------------------------------------------------Connecting external data media Notes: 7  Before connecting the data medium, switch the television to standby with »8«. Connect the device and then switch the television on again. 7 Before removing the external data medium, the television must be switched to standby, so that no data loss occurs. Notes: 7  The »USB1« socket of the television supplies a maximum power of 500 mA in accordance with USB specifications. External hard disks which require more power may therefore only be connected to the »USB2 (HDD)« of the television. 7  7  Your television features two USB sockets, »USB1« and »USB2 (HDD)«. »USB2 (HDD)« is used to connect data ­ media, which require an additional power supply – for example, external hard disks. If you use a network cable for external hard disks which have been connected to the »USB2 (HDD)« socket of the television, this network cable must also be disconnected from the power supply when the television is switched off. External data media may not be disconnected from the television while files on the data medium are being accessed. 7  Settings for USB recording Selecting the menu 1 Open the menu with »MENU«. 2 Select the line »USB RECORDING« with »V« or »Λ« and press »OK« to confirm. T 20. 09. 2010 15:46 USB RECORDING PRnP Auto Preview OK On 1 Connect the »USB2 (HDD)« socket of the t ­elevision and the corresponding socket of the data medium (external hard disk) using a USB cable; or insert the USB plug of the USB memory stick into the »USB1« socket of the television. « with »« Manage data medium Safely Remove Disk Disk USB C: %3 1249 38145 1, 008 min 288 min Partition Capacity Used Used (MB) Total (MB) Remaining SD recording time Remaining HD recording time 2 Confirm the display » (green). T Exit Back 4 ­ 0 ENGLISH USB RECORDING- ------------------------------------------------------------------------------------------------------------Switching on automatic preview If the automatic preview is switched on, a preview of the selected file appears in the file browser. 1 Select the line »Auto Preview« with »V« or »Λ«. 2 Switch on the function with »<« or »>« (»On«). 3 Press »MENU« to end the setting. Testing the external data medium You can subject external data media to a test and establish whether they are suitable for the chosen functionality. 1 Select the line »Disk« with »V« or »Λ«. If several data media are connected, select the preferred data medium with »<« or »>«. 2 Select the line »Partition« with »V« or »Λ«. If several partitions are available, select the partition you wish to use with »<« or »>«. 3 Select the line »Check Disk« with »V« or »Λ« and press »OK« to confirm. 4 Press »MENU« to end the setting. Safely remove disk 1 Select the line »Safely Remove Disk« with »V« or »Λ« and press »OK« to confirm. 7 Note: The disk can now be removed from the socket. Selecting external data media If several external data media are connected to the television, you can select the preferred data medium. 1 Select the line »Disk« with »V« or »Λ« 2 Select the preferred data medium with »<« or »>«. 3 Press »MENU« to end the setting. Selecting a partition on the external data medium If the external data medium features several partitions, select the partition you would like to use. [. . . ] Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. SRD with DSSS and other than FHSS wideband modulation 7 Maximum mean e. i. r. p. Permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. [. . . ]