User manual GRASSLIN SOCKET BOX DIGITAL SBST DIGI

[. . . ] Grässlin (UK) Ltd Tel : 01732 359888 Fax : 01732 354445 INSTALLATION & OPERATING INSTRUCTIONS SOCKET BOX DIGITAL SBST DIGI INSTALLATION ­ GENERAL NOTES: 1. [. . . ] UNSCREW THE TWO SCREWS LOCATED TOP RIGHT AND BOTTOM LEFT OF FRONT MODULE COVER, REMOVE COVER AND GENTLY PULL MODULE FROM BACKPLATE. DO NOT PUT UNDUE STRESS ON, "OR" INTERFERE WITH FIXED BLUE WIRE. BARE WIRES BACK FOR 6mm (1/4inch) MAXIMUM; INSERT INTO TERMINALS AND SECURE WITH THE SCREWS, IN ACCORDANCE WITH CIRCUIT DIAGRAM LABEL BENEATH TERMINALS. 7. SETTING UP / PROGRAMMING SETTING THE CLOCK 1/ PRESS AND HOLD THE CLOCK FACE BUTTON 2/ SET THE CURRENT DAY, HOUR AND MINUTE ( D, H, M) 3/ ONCE YOU HAVE SET THE DAY, HOUR AND MINUTE, RELEASE THE CLOCK FACE BUTTON SETTING THE PROGRAMMES 1/ PRESS AND RELEASE THE PROG BUTTON 2/ INPUT THE DAY OR DAYS, HOURS AND MINUTES (D, H, M) 3/ PRESS THE HAND BUTTON ONCE, CIRCLE WITH A DOT SHOULD APPEAR ON DISPLY INDICATING AN ON COMMAND 4/ PRESS PROG BUTTON AND REPEAT STEP 2 TO SET UP OFF TIME 5/ PRESS HAND BUTTON TWICE, CIRCLE WITHOUT A DOT TO INDICATE OFF COMMAND 6/ REPEAT STEPS 1 THROUGH 5 IF YOU WISH TO INPUT MORE PROGRAMME SETTINGS 7/ PRESS AND RELEASE THE CLOCK FACE BUTTON TO RETURN TO NORMAL TIME 8/ PRESS THE PROG BUTTON SEQUENTIALLY TO REVIEW OR CHANGE YOUR PROGRAMME SETTINGS 9/ WHEN DISPLAY SHOWS BLANKS WHERE THE TIME SHOULD BE, THIS IS YOUR NEXT PROGRAMME SLOT 10/ PRESS THE PROG BUTTON ONCE MORE AND AN FR NUMBER WILL BE DISPLAYED. [. . . ] THE TIMER WILL NOW STAY ON UNTIL NEXT PROGRAMMED OFF TIME AND SWITCH BACK TO TIMED MODE READY FOR NEXT PROGRAM [. . . ]