User manual GP BATTERIES PB65

[. . . ] Corded-type charger with AC100-240V adaptor Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LED icons Digital clock Safety guaranteed Read the instruction manual thoroughly before use. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. [. . . ] Remove batteries from an electrical device if it will not be used for a long time. Button cell can be replaced by opening the battery door anticlockwise at the back cover of the charger with a clip. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Unplug the charger from the outlet before attempting to clean or when not in use. Button cell can be replaced by opening the battery door anticlockwise at the back cover of the charger with a clip. Button cell can be replaced by opening the battery door anticlockwise at the back cover of the charger with a clip. Corded-type charger with AC100-240V adaptor Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LED icons Digital clock Safety guaranteed Read the instruction manual thoroughly before use. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. 2) When inserting AAA batteries into the charging slots, slant the batteries to ensure smooth contact with the plates. If alkaline, carbon zinc, lithium, rechargeable alkaline or damaged batteries are mistakenly inserted into the charging slots, the corresponding Battery Icon and the Warning Icon will blink fastly and the charger will stop charging. If the charger does not work properly, all Battery Icons and the Charging Icon will turn off. Once charging is complete, unplug the charger from the power source and remove the batteries. [. . . ] Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Unplug the charger from the outlet before attempting to clean or when not in use. Button cell can be replaced by opening the battery door anticlockwise at the back cover of the charger with a clip. [. . . ]