User manual GP BATTERIES PB60

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GP BATTERIES PB60. We hope that this GP BATTERIES PB60 user guide will be useful to you.


GP BATTERIES PB60 : Download the complete user guide (3423 Ko)

Manual abstract: user guide GP BATTERIES PB60

Detailed instructions for use are in the User's Guide.

[. . . ] Corded-type charger with AC100-240V adaptor Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LCD display Safety guaranteed Read the instruction manual thoroughly before use. Connect GP AC 1A adaptor to the charger and plug it into the power source (Fig. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). [. . . ] It is normal for batteries to become hot during charging and they will gradually cool down to room temperature after being fully charged. For best result, use GP PowerBank V600D at room temperature with good ventilation. Remove batteries from an electrical device if it will not be used for a long time. For best performance and optimal safety, charge GP NiMH batteries with GP PowerBank V600D. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Corded-type charger with AC100-240V adaptor Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LCD display Safety guaranteed Read the instruction manual thoroughly before use. Connect GP AC 1A adaptor to the charger and plug it into the power source (Fig. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. 2) When inserting AAA batteries into the charging slots, slant the batteries to ensure smooth contact with the plates. If alkaline, carbon zinc, lithium, rechargeable alkaline or damaged batteries are mistakenly inserted into the charging slots, the corresponding Battery Icon and the Warning Icon will blink fastly and the charger will stop charging. Make use of the Battery Location Dot to identify the charging slots represented by the battery icons on the main screen, which are correlated with the icons on the silkscreen on the battery compartment. If the charger does not work properly, all Battery Icons and the Charging Icon will turn off. [. . . ] Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Anslut GP AC 1A adaptern till laddaren och anslut den till strömkällan. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GP BATTERIES PB60




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GP BATTERIES PB60 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.