User manual GOODMANS 206NS

[. . . ] 6 GENERAL PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SAFETY PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 NOTES ON DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NTSC: Select this option if your TV supports only NTSC. 2. 2. 2. 2 TV DISPLAY TV Display controls the presentation of the picture on the screen. 4:3 PS 4:3 LB 16:9 WS 4:3 PS: (Normal/PS Pan & Scan) Allows the movie to fill the entire screen of your TV, but not the right and left edges. 4:3 LB: (Normal/LB Letterbox (4x3)) Allows you to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen. 16:9 WS: (Wide Widescreen (16x9)) Choose this setting if your DVD recorder is connected to a widescreen TV. 2. 35:1 the picture may still have black lines above and below the picture. 22 2. 2. 2. 3 SCREENSAVER This menu option allows user to activate screensaver while the unit is not in use for a while. 2. 2. 3 AUDIO 2. 2. 3. 1 DOWNMIX Downmix means mixing 5. 1 channels down to two channels. When Downmix is "Off" you will see all possible settings for 5. 1 speaker systems. Set these options to agree with the speakers installed in your home entertainment system. Surround: Surround encoded output. 2. 2. 3. 2 SPDIF OUTPUT This item can be selected as "RAW" or "LPCM". 2. 2. 3. 3 LPCM OUTPUT This item can be selected as "LPCM 96K" or "LPCM 48K". Choose "LPCM 96K" if your AV amplifier/receiver is compatible with 96K sampling rate audio, otherwise leave it set to "LPCM 48K". 2. 2. 3. 4 DYNAMIC RANGE Dynamic range adjusts frequency response. This control is useful to turn down the level of loud passages (explosions, car crashes, and etc. ), while at the same time keeping soft passages loud enough to hear them clearly. Full: The range between loudest and softest is compressed to the maximum. Ø CHANGE PASSWORD The password for parental level can be set and changed by using this option. You have to set a XXXX numeric password when it is the first time to select a parental level. You have to enter your password every time you want to watch a movie with a higher parental setting or to change the parental level of the system. To change the password, you will be prompted to enter your old password. Enter password : Enter your current password(four numbers you previously set in here) Enter new password: Enter your choice for a new password. Otherwise you can use the password at last page, to enter this menu. 2. 2. 6. 3 FACTORY DEFAULTS When you choose Factory Defaults option, after resetting all your Setup options back to factory settings, the device will restart itself automatically and first time installation will be displayed. CAUTION: Parental level and parental password do not change. 2. 2. 6. 4 STANDBY TIME You can set the standby time as 5, 15 or 30 minutes or set it off by choosing "Off" option from the menu. The unit goes to standby state if one of the time options is selected and no key press occurs for the selected time duration while in stop mode. NOTE: In monitor mode, device will not switch to standby mode. 25 2. 2. 6. 5 AV-2 This menu option allows you to set AV-2 as "Decoder" or "SCART CVBS" output. When "Decoder" option is selected, "SCART" is removed from the available video sources list and an additional menu item ("Decoder On/Off") is added into "Modify Channel" menu. In the "Modify Channel" menu, if you select Decoder option as "On", you can watch scrambled channels with appropriate decoder. [. . . ] The language for the sound or subtitles on a DVD cannot be changed · Multilingual sound and/or subtitles not recorded on the DVD. · Try to change the sound or subtitles using DVD's title menu. Some DVD's do not allow the user to change these settings without using the disc's menu. Some functions(Angle, Zoom etc. ) do not work · These functions are not available on the DVD. [. . . ]