User manual GLOBALSAT BT-359

[. . . ] The BT-359 is well suited to system integrations including PDA, Smart phone, Tablet PC and Notebook PC with Bluetooth devices. It satisfies a wide variety of applications that are purposes in automotive and outdoor recreation navigation systems. 2. 1 Package Before you start up, make sure that your package includes following items. If any item is missing or damaged, please contact your dealer immediately. [. . . ] Running the suitable mapping/navigation software and select the correct COM port & baud rate: 38400. Please refer to the user manual of Bluetooth device to enable it connects to the BT-359. Some Bluetooth devices may need the Bluetooth passkey, the passkey is "0000". Running the suitable mapping/navigation software and select the correct COM port & baud rate: 38400. Note: The Bluetooth device in most of the applications have an "auto-detect" feature that you do not need to select the Baud Rate. 6 5. How to test your Bluetooth GPS Receiver? The testing program only supports the Microsoft Windows CE & Pocket PC based PDA platform. Run the "GPSinfo. exe" to execute the installation procedure of testing program (via PC and ActiveSync). Run the "GPS Information" program from "Start Program files" of PDA. Here is the description of "GPS Information" testing program: User must select COM port, Baud Rate (38400) and click the [Star GPS] button to start receiving GPS data. Note: The Bluetooth device in most of the applications have an "auto-detect" feature that you do not need to select the Baud Rate. 7 8 6. Troubleshooting Bluetooth is unable to connect A) Check if the GPS Bluetooth indicator is flashing normally. That is, flash one per each three second means the product is under standby mode; flash once per second means Bluetooth has been online already. If red LED is lid up, then the battery level is insufficient, please recharge it until the red indicator is off (recharge is complete). GPS cannot be positioned A) Check if GPS indicator operates normally or not. If the indicator is constantly lid up, it means that GPS is in operation; if the indicator is flashing, it means GPS is positioned already. [. . . ] Other Comments Please allow an adequate amount of time for the GPS receiver's boot-up (TTF) to complete before contacting Technical Support. FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. [. . . ]