User manual GIGAFAST PE902-EBX

[. . . ] HomePlug Ethernet Bridge PE 902-EBx User Manual Copyright The contents of this publication may not be reproduced in any part of as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without prior written permission. Trademarks All product, company, and brand names are trademarks or registered trademarks of their respective companies. Specifications are subject to be charged without prior notice. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, it may cause harmful interference to radio communications. [. . . ] Static IP Addressing Static IP Addressing is where the computer will have a preconfigured IP Address. This scheme should be used if you want to keep the same settings on each computer all the time. If the subnet of the network changes (subnet is the first 3 groups of the IP) the subnet of the static computer must also change. 23 Checking IP Address (Windows 98SE/ ME/ 2000 / XP) 1. Your IP Address will Display, along with the Subnet Mask, and your Gateway 27 Setting Static IP Address Part 1: Windows 98 SE / ME 1. Right Click on "Network Neighborhood" and click "Properties" 28 2. Click on "TCP/IP" for the network adapter you want to set IP addresses for 29 3. Click on "Specify an IP address" Type in the IP Address you wish to use. (192. 168. XXX. XXX is very standard for home networks) Click on the Subnet mask, and if you know the subnet mask you want to use, type it in, otherwise it should fill in with "255. 255. 255. 0" which is very standard for subnet masks. 30 4. Click on the "Gateway" tab, and add in your gateway IP address. 31 5. Click on the "DNS Configuration" tab, and add in your DNS server IP address. To save the changes you must restart, so click "YES" 33 Part 2: Windows 2000 / XP 1. Find and "Double Click" the Local Area Connection for the Network adapter you want to Set IP's for. 35 3. Click(Highlight) "Internet Protocol (TCP/IP)" and click "Properties" 37 5. Click "Use the following IP address" Type in the IP Address you wish to use. (192. 168. XXX. XXX is very standard for home networks) Click on the Subnet mask, and if you know the subnet mask you want to use, type it in, otherwise it should fill in with "255. 255. 255. 0" which is very standard for subnet masks. If you know the DNS you are going to use, fill it in otherwise leave it blank. To check that everything is Correct, Click on "Support" and the information you typed in should appear. 39 Release and Renew an IP address Part 1: Windows 98 SE / ME 1. Select the Network adapter you want to release IP's for. 42 4. If you Click Release, and an error saying "IP Address for adapter is already released" then you do not need to release any more, Try "Renewing your IP" 45 Part 2: Windows 2000 / XP 1. If you receive an Error "The operation failed as no adapter is in the state permissible for this operation. " Then you might need to set your Network adapter to obtain your "IP Address Automatically". 50 Appendix C: Local Area Network Sharing Files (Windows 98SE / ME / 2000 / XP) Part 1: Sharing Folders 1. Double Click the Drive where the folder that you want to share is located. 52 3. Right Click on the folder you want to share, and click "Properties" 53 4. [. . . ] It is widely used in corporate Internet works, because of its superior design for WANs. The term "TCP/IP" is often used generically to refer to the entire suite of related protocols. 96 Wide Area Network (WAN) A WAN consists of multiple LANs that are tied together via telephone services and / or fiber optic cabling. WANs may span a city, a state, a country, or even the world. Appendix E: Product Specification Computer Interface Network Interface Cable Connection: Installation: LED Indicators: Certifications: Operating Temperature: Humidity: Certifications: HomePlug Configuration Utility Support: IEEE802. 3 HomePlug Powerline 10Base-T: UTP CAT. 3, 4, 5 100Base-TX: UTP CAT. 5 Plug-and-Play PWR: Power HP: HomePlug ACT Link / Act, Eth: Link / Act HomePlug Powerline Specification 1. 0 0 ­ 40C 5% - 90% FCC Class B / CE Mark Windows 98SE/ ME/ 2000/ XP Warranty: Three Year & Free Technical Support (US Only) 97 Appendix F: Warranty Info. Limited Warranty Limited Warranty Statement: GigaFast Ethernet Solutions Inc. ("GFE") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. [. . . ]