User manual GIGAFAST EE102-DLX

[. . . ] 6 Wire Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing Network Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Standard Windows 95 (Version 4. 00. 950 and 4. 00. 950a). . . . . . . . . . . . . . . . . [. . . ] If prompted, supply the Windows 95 CD-ROM or type the directory path to the Windows 95 files on your PC and click OK. Remove the OEM diskette and restart computer. Confirming Installation: 1. The name of the installed "Realtek RTL8139(B/C) CardBus Fast Ethernet" appears. 9 6. Double-click the Rtl8139BL name to display a description of the card and its current status. Standard Windows 95 Version 4. 00. 950b (OSR2) Installation: 1. Select "RealtekRTL8139(B/C) CardBus Fast Ethernet" and click OK. If prompted, supply the Windows 95 CD-ROM or type the directory path to the Windows 95 files on your PC and click OK. Remove the OEM diskette and restart computer. Windows NT Version 4. 0 Installation: 1. Select "RealtekRTL8139(B/C) CardBus 10/100 Ethernet" and click OK. If prompted, supply the Windows 95 CD-ROM or type the directory path to the Windows 95 files on your PC and click OK. Remove the OEM diskette and restart computer. Windows 2000 Installation: 1. Inter Rtl8139BL PC Card and the Found New Hardware Wizard window will appear. Click the default "Search for a suitable driver for my device (recommended)" and click Next. 11 4. Inter Rtl8139BL PC Card and the Found New Hardware Wizard window will appear. Click the default "Search for a suitable driver for my device (recommended)" and click Next. Add this line 12 "device=c:\DOS\himem. sys" In order to work well with emm386, remove the argument "NOEMS" as "device=c:\dos\emm386" or edit it as "device=c:\dos\emm386 x=d000-d3ff" or remark it as "rem device=c:\dos\emm386" 3. Execute encbodi. bat, and the driver is installed. 13 Microsoft Network Client for DOS Windows for Workgroups v3. 11 Installing the NDIS2 driver for CardBus card is the following steps: After install driver in Microsoft Client or Windows 3. 11 1. Check config. sys and remove the argument "NOEMS" of EMM386. sys 2. Straight-through cables are used for connecting computers' NIC cards to a hub. Uplink mode is crossed internally, which allows you to link or connect hubs together with a straight-through cable instead. ) A-1-1 RJ-45 pin assignment There are 8 thin, color-coded wires inside, run from one end of the cable to the other. Table 0-1 RJ-45 Color Chart White with an Orange stripe Orange White with a Green Stripe Blue White with a Blue Stripe Green White with a Brown Stripe Brown Wire 1 Wire 2 Wire 3 Wire 4 Wire 5 Wire 6 Wire 7 Wire 8 Pin 1 *Note* To determine which wire is wire number 1, hold the cable so that the end of the plastic RJ-45 tip (the part that goes into a wall jack first) is facing away from you. Face the clip down so that the copper side faces up (the springy clip will now be facing the floor), when looking down on the copper side, wire 1 is on the far left. Connection between NIC card and Hub 17 In a straight-through cable, wire 1, 2, 3, and 6 at one end of the cable are the same as wires 1, 2, 3, and 6 at the other end. [. . . ] THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. GFE NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. GFE SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), SHALL GFE BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF GFE OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ]