User manual GIGABYTE SUMO 5112

[. . . ] (http://www. gigabyte. com. tw) The following is not covered by warranty: 1. Using the product incorrectly or in a manner other than its designed purpose. [. . . ] Sufficient spacing for easy 10. 5" VGA card installations. 06 English 3. Specifications Model Case Type Dimensions Front bezel material Color Side panel Body material Net weight 5. 25" drive bay (External) 3. 5" drive bay (External) 3. 5" drive bay (Internal) Expansion slots Form factor System Fan (front) System Fan (rear) System Fan (side) I / O ports GZ-FADA51-CJB FULL TOWER 205 x 522 x 560 (W x H x D) Aluminum Black Vent / Transparent SECC (0. 8mm) 12. 1 KG 4 1 5 7 E-ATX / CEB / ATX / Micro ATX 1 x 12cm silent fan 2 x 12cm blue LED illuminated silent fan 2 x 8cm HDD cooling fan 1 x eSATA / 2 x USB 2. 0 / 1 x IEEE1394 / 1 x Audio Set (AC'97/HD) English 07 4. Installation Instruction Please follow the reference sections in order for installation. 4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. Required parts: power supply securing screws x 4 4-1. 1 4-1. 2 4-1. 3 4-1. 4 Remove side panel (see step 1-3. 1on page 5). When using large power supply unit, please disassemble the cross bar by loosening screws. Fasten the screws to secure the cross bar after the power supply is installed. 4-1. 2 4-1. 3 4-1. 4 4-1. 1 4-2 Installation of Motherboard This chassis supports E-ATX / CEB / ATX / Micro ATX motherboards. Please confirm the dimensions and fixing points of the motherboard prior to installation. Required parts: Copper stand offs, Motherboard screws and screw driver 4-2. 1 According to the motherboard's specifications, select the proper screw points. Screw in the copper stand offs into the corresponding points on the motherboard. 4-2. 2 Change the motherboard I/O bracket on the rear panel (supplied by the motherboard manufacturer). Motherboard Code on tray Securing screw Copper stand off 4-2. 3 Secure the motherboard with the motherboard E-ATX E1-E12 11 11 screws (refer to your motherboard manual to CEB E1-E8 8 8 ATX A1-A9 9 9 check what type of motherboard you have). Micro ATX U1-U9 9 9 4-2. 1 4-2. 2 4-2. 3 4-3 Installation of Add-On card This chassis supports tool-free installation of add-on cards (10. 5" length or lower. ), e. g. graphics cards, sound cards, and etc. Required Tools: None 4-3. 1 4-3. 2 4-3. 3 4-3. 4 Unlock the PCI slot clamp. [. . . ] 4-11-3 Unsecure the existing LED & separate the wire from LED holder from open gap, then reinstall blue light LED & wire. 4-11. 2 4-11. 3 4-12 Application of Security locks This chassis provides one security lock, including side panel lock. [. . . ]