User manual GIGABYTE R270-R3C ANNEXE 1

[. . . ] 1. 0 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2015 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] Display version number of the BIOS setup utility. BIOS Build Date and Time BMC Information BMC Firmware Version SDR Version FRU Version Displays the date and time when the BIOS setup utility was created. Display version number of the Firmware setup utility. Display the FRU version information. Processor Information CPU Brand String/Max CPU Speed/CPU Signature/Processors Core/Microcode Patch Memory Information Total Memory Memory Frequency Displays the technical specifications for the installed processor. Display the total memory size of the installed memory. - 41 BIOS Setup Onboard LAN Information LAN1/LAN2 MAC Address System Date Display LAN1/LAN2 MAC address information. Set the system time following the hour-minute- second format. System Time BIOS Setup - 42 - 5-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. - 43 - BIOS Setup 5-2-1 Serial Port Console Redirection BIOS Setup - 44 - - 45 - BIOS Setup COM1/COM2/Serial Over AN Console Redirection Settings Console Redirection (Note) Select whether to enable console redirection for specified device. Console redirection enables users to manage the system from a remote location. Default setting is Disabled. Console Redirection Settings Terminal Type Bits per second Select a terminal type to be used for console redirection. A parity bit can be sent with the data bits to detect some transmission errors. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to re-start the flow. Default setting is Disabled. Data Bits Parity Stop Bits Flow Control VT-UTF8 Combo Key Support (Note) Recorder Mode (Note) Resolution 100x31 (Note) Enables or disables extended terminal resolution. Options available: Enabled/Disabled. (Note) Advanced items prompt when this item is defined. BIOS Setup - 46 - Legacy OS Redirection Resolution (Note) On Legacy OS, the number of Rows and Columns supported redirection. Default setting is 80x24. (Note) Putty KeyPad Redirection After BIOS POST Select function FunctionKey and KeyPad on Putty. Default setting is VT100. (Note) Out-of-Bnad Mgmt Port This option allows user to enable console redirection after O. S has loaded. Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows Server OS through a serial port. Default setting is COM1. (Note) Advanced items prompt when this item is defined. - 47 - BIOS Setup 5-2-2 PCI Subsystem Settings PCI Express Slot #1/#2/#3/#4/#5/#6 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Enabled. Onboard LAN#1/#2 Controller Onboard LAN #1/#2 I/O ROM PCI Devices Common Settings PCI Latency Timer VGA Palette Snoop Value to be programmed into PCI Latency Timer Register. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks/. Default setting is Disabled. Above 4G Decoding BIOS Setup - 48 - SR-IOV Support If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. [. . . ] When set to Custom, you can customize the Secure Boot settings and manually load its keys from the BIOS database. Press [Enter] for configuration of advanced items. Key Management(Note) (Note) Advanced items prompt when this item is set to Cutom. BIOS Setup - 110 - 5-5-1-1 Key Management Default Key Provisioning Force the system to Setup Mode. This will clear all Secure Boot Variables such as Platform Key (PK), Key-exchange Key (KEK), Authorized Signature Database (db), and Forbidden Signaures Database (dbx). Enroll All Factory Default Keys Options available: Enabled/Disabled. [. . . ]