User manual GIGABYTE MW50-SV0

[. . . ] Get an access to our complete source of sales, marketing & technical materials at: http://reseller. b2b. gigabyte. com https://www. facebook. com/gigabyteserver Table of Contents Box Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MW50-SV0 Motherboard Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Chapter 1 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1-1 1-2 1-3 Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU and CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows Server OS through a serial port. Default setting is COM1. (Note) Advanced items prompt when this item is defined. - 45 - BIOS Setup 2-2-2 PCI Subsystem Settings PCI x8 Slot #1 From CPU/Marvell 9230/PCIE x16 Slot#3/#4 From CPU When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. When enabled, This setting will initialize the device expansion ROM for the related PCI slot. Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Enabled. PCI 32bit/33MHz Onboard LAN#1/#2/#3 Controller Onboard LAN #1/#2/#3 I/O ROM PCI Devices Common Settings PCI Latency Timer VGA Palette Snoop Value to be programmed into PCI Latency Timer Register. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks/. Default setting is Disabled. BIOS Setup - 46 - Above 4G Decoding Enable/Disable Above 4G Decoding. If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. Press [Enter] for configuration of advanced items. SR-IOV Support PCI Express Settings PCI Hot-Plug Settings - 47 - BIOS Setup 2-2-2-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Wnen this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Display current TPM status information. Current Status Information - 55 - BIOS Setup 2-2-7 USB Configuration USB Configuration USB Devices: XHCI Hand-off Display the USB devices connected to the system. This should be enabled for the complete USB Keyboard Legacy support for non-USB aware OS. Default setting is Enabled. EHCI Hand-off USB Mass Storage Driver Support(Note) Port 60/64 Emulation (Note) This item is present only if you attach USB types of device. - 56 - BIOS Setup 2-2-8 Chipset Configuration Restore on AC Power Loss Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. Configure ystem fan curve mode Options available: Full Dpeed Mode/Performance ModeBalanced mode/Energy Saving Mode. Default setting is Disabled. Fan Curve Mode Chassis Opened Warning - 57 - BIOS Setup 2-2-9 HW Monitor Press Enter to view the Hardware Monitor screen which displays a real-time record of the CPU/system temperature, and fan speed, Items on this window are non-configurable. BIOS Setup - 58 - 2-2-10 Intel(R) Thunderbolt Intel (R) Thunderbolt Configuration Thunderbolt Specification Intel Sample Code Version Thunderbolt Host Chip Intel Thunderbolt Technology(Note) Enable/Disable Intel Thunderbolt Technology feature. Options available: Legacy Mode/Unique ID/One time saved key/DP++ only. Default setting is CPU0 NB PCIE Slot. Security Level Wake From Thunderbolt Devices AIC Support (Add In Card Support) AIC Location Group (Note) Advanced items prompt when this item is set to Enabled. - 59 - BIOS Setup AIC Location Options available: NB PCIE D01F0/NB PCIE D01F1/NB PCIE D01F2/NB PCIE D02F0/NB PCIE D02F1/ NB PCIE D02F2/NB PCIE D02F3/NB PCIE D03F0/NB PCIE D03F1/NB PCIE D03F2/NB PCIE D03F3. Default setting is Disabled. Thunderbolt PCIe Cache-line Size SMI/Notify Support SuSMI Support Notify Support Ignore Thunderbolt Option Rom Thunderbolt SwSMI Delay Configure the Thunderbolt SwSMI Delay. [. . . ] Press Enter to configure the boot priority. - 121 - BIOS Setup 2-7 Save & Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Save Options Save Changes Discard Changes Saves changes made in the BIOS setup. Options available: Yes/No. Restore Defaults Discards changes made and close the BIOS setup. [. . . ]