User manual GIGABYTE M6980X

[. . . ] The combination of 6000dpi, 1000rps report rate and 30G acceleration provide a very accurate basis for gaming. GHOST™ Macro Engine of 8KB on-board memory supports 3 gaming profiles stored on the mouse. [. . . ] Each single macro also can be imported and exported onto your hard disk for further usage. Start with: Step 1 Click “Record the duration or intervals” if you’d like to record intervals between two commands. Step 2 Double-click “Cycle through selection of action mode” to change the execute mode. Step 3 Click “Record” to start creating a macro and recording all the keystrokes or mouse commands. Step 4 Click “Stop” to finish recording this macro when a macro is done. Step 5 You can also insert additional commands on the “Quick-insert bar” left. Step 6 After recording a macro, you may drag commands of the macro and drop into “On-board script” to store this macro on the mouse. Moreover, you may also change icon of your personal macro through clicking “change icon”. Step 8 Come back to “Button Assign” tab, the macro you had built would become one application of “Macro scrip” in this tab. -4- Learn more: Record the duration or intervals (Time lag) If this function is marked, it allows you to record the intervals between two commands. [. . . ] You can set the report rate to 125Hz (8ms), 250Hz (4ms), 500Hz (2ms), or 1000Hz (1ms) by moving the knob on the slider. Scrolling You can adjust vertical & horizontal scroll wheel speed by moving the knob on the slider. [. . . ]