User manual GIGABYTE GBT BTX COOLER GH-ESB21-TH INSTALLATION

[. . . ] Intel® Pentium® 4 LGA775 Installation Guide GH-ESB21-TH REV. 1001 050916 English Table of Contents Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warranty Item. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation Instructions for P4 LGA775 & Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 GH-ESB21-TH -2- English Checklist (1) GH-ESB21-TH Cooler x 1 (2) GH-ESB21-TH Installation Guide x 1 (3) Grease x 1 (4) Screw x 4 -3- GH-ESB21-TH English Specification Fan Dimension : 92 x 92 x 38 mm Heat Sink Dimension : 86 x 123 x 71 mm Material : Extrusion Aluminum fin + Copper core Fan Speed Control: PWM & Temperature Control Connector: 4 pin Rated Voltage : 12V Rated Current : 1. 13Amp (max) Airflow : 91. 71 CFM ( max ) Bearing type : Two Ball Bearing Life Expectancy : 70, 000 hr Total Weight : 1120 g Application : Intel® Pentium® 4 LGA775 Feature Supports Intel BTX Type I Cooler (Supports Intel BTX & Micro BTX System) Large 5 cm copper core insert. [. . . ] Please make sure the computer is turned off and its power disconnected prior to installation. Warranty Item <Warranty coverage does not include the following> Incorrect method of operation or use of product not for intended use. Inability to install the product as a result of incompatibility with the motherboard used. Due to the weight of the cooler exceeding normal standards, please remove the cooler before computer transport to prevent damage to the cooler itself as well as prevent problems during installtion. -5- GH-ESB21-TH English Installation Instructions for P4 LGA775 & Cooler Fig. 1 Apply an even layer of thermal paste on the surface of the installed CPU. Fig. 2 Install the motherboard in the chassis. Align the GH-ESB21-TH Cooler with the screw holes and place it onto the motherboard. Before use, please remove the bottom protective layer of the cooler. Fig. 3 Fasten the cooler with screws (Note). [. . . ] Assure that the cooler is securely attached to the motherboard and chassis. Fig. 4 Finally, please attach the power connector of the cooler to the CPU fan header located on the motherboard. GH-ESB21-TH -6- English (Note) The four screws can be screwed as below: Combination 1: A+C+D+F or Combination 2: B+C+E+F A B C D E F -7- GH-ESB21-TH English GH-ESB21-TH -8- [. . . ]