User manual GIGABYTE GA-Z97X-GAMING GT

[. . . ] 1001 12ME-Z97XGGT-1001R Motherboard GA-Z97X-Gaming GT Motherboard GA-Z97X-Gaming GT Apr. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default: Enabled) BIOS Setup - 58 - && EHCI Hand-off && USB Storage Devices Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Displays a list of connected USB mass storage devices. Set to Enabled to ensure proper device functionality when chaining two KVM switches. (Default: Disabled) && Two Layer KVM Switch && OnBoard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. `` SATA Configuration && Integrated SATA Controller && SATA Mode Selection Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Express SRIS capabilities Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) Enables or disables SATA Express SRIS (Separate Reference Clocks with Independent SSC) mode. (Default: Disabled) - 59 - BIOS Setup `` Serial ATA Port 0/1/2/3/4/5 && Port 0/1/2/3/4/5 && Hot plug Enables or disables each SATA port. (Default: Enabled) Enables or disable the hot plug capability for each SATA port. (Default: Disabled) Enables or disables support for external SATA devices. (Default: Disabled) && External SATA `` Super IO Configuration && Serial Port A This section provides information on the super I/O chip and allows you to configure the serial port. (Default: Enabled) `` Intel(R) Smart Connect Technology && ISCT Support Enables or disables Intel® Smart Connect Technology. (Default: Disabled) `` Marvell SATA Controller Configuration (Marvell® 88SE9172 Chip, GSATA3 6/7 connectors) && GSATA Controller Enables or disables RAID for the SATA controllers integrated in the Marvell® SATA controllers or configures the SATA controllers to AHCI mode. The area below displays the current status of each SATA port. IDE Mode  D  isables RAID for the SATA controllers and configures the SATA controllers to IDE mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. - 60 - BIOS Setup 2-7 Power Management && Power Loading && Resume by Alarm Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. (Default: Auto) Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.  Wake up hour/minute/second: Set the time at which the system will be powered on automatically.  Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix - 128 - FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]