User manual GIGABYTE GA-Z87X-UD7 TH

[. . . ] 2002 12ME-Z87UD7T-2002R Motherboard GA-Z87X-UD7 TH Motherboard GA-Z87X-UD7 TH Oct. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default: Enabled) Allows you to set the onboard graphics memory size. (Default: 64M) && XHCI Mode (Intel® Z87 Chipset) && Audio Controller && Intel Processor Graphics && Intel Processor Graphics Memory Allocation && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. (Default: MAX) && Intel(R) Rapid Start Technology && Legacy USB Support && XHCI Hand-off Enables or disables Intel® Rapid Start Technology. (Default: Enabled) Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) - 59 BIOS Setup && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Displays a list of connected USB mass storage devices. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. && USB Storage Devices && OnBoard LAN Controller (LAN1) `` SATA Configuration (Intel® Z87 Chipset) && Integrated SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) `` Serial ATA Port 0/1/2/3/4/5 && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && External SATA Enables or disables support for external SATA devices. (Default: Disabled) - 60 BIOS Setup `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. (Default: Enabled) && Serial Port A `` Intel(R) Smart Connect Technology && ISCT Configuration Enables or disables Intel® Smart Connect Technology. (Default: Disabled) `` Intel(R) Thunderbolt This sub-menu provides Thurderbolt related information and configuration options. `` Marvell SATA Controller Configuration && GSATA Controller (Marvell® 88SE9230 Chip, GSATA3 6/7/8/9 connectors) Enables or disables RAID for the SATA controllers integrated in the Marvell® 88SE9230 chip or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) Disabled  Disables this function. `` Intel(R) Ethernet Network Connection This sub-menu provides information on LAN configuration and related configuration options. - 61 BIOS Setup 2-7 Power Management && Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. (Default: Auto) Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.  Wake up hour/minute/second: Set the time at which the system will be powered on automatically. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix - 126 - FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]