User manual GIGABYTE GA-Z77-D3H

[. . . ] The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, orpublished in any form or by any means without GIGABYTE's prior written permission. [. . . ] (Default: Enabled) Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) Displays a list of connected USB mass storage devices. & Port 60/64 Emulation & USB Storage Devices ` Trusted Computing & TPM SUPPORT Enables or disables Trusted Platform Module (TPM). 0 Controller, R_USB30_1 ports on the back panel) & OnBoard LAN Controller#1 Enables or disables the Etron EJ168 USB 3. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. Auto Lets the BIOS automatically configure this setting depending on the expansion card being installed. All PCIe x1 and PCI slots will become unavailable when a PCIe x4 expansion card is installed. & PCI Express x4 Slot ` Super IO Configuration & Serial Port A This section provides information on the super I/O chip and allows you to configure the serial port. (Default: Disabled) BIOS Setup - 52 - 2-7 Power Management & AC BACK & Power On By Keyboard Determines the state of the system after the return of power from an AC power loss. (Default) Always On The system is turned on upon the return of the AC power. Memory The system returns to its last known awake state upon the return of the AC power. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time at which the system will be powered on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. & Resume by Alarm & ErP - 53 - BIOS Setup & High Precision Event Timer (Note) & Soft-Off by PWR-BTTN Enables or disables High Precision Event Timer (HPET) for Windows 7 operating system. (Default: Enabled) Configures the way to turn off the computer in MS-DOS mode using the power button. [. . . ] Reinstall other devices one by one (install one device at one time and then boot the system to see if the device works successfully). END If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & Downloads\Technical Support page to submit your question. Appendix - 98 - 5-3-3 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. [. . . ]