User manual GIGABYTE GA-J1800N-D2PH

[. . . ] 1101 12ME-J18N2PH-1101R Motherboard GA-J1800N-D2PH Motherboard GA-J1800N-D2PH Sept. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. && Resume by Alarm && DDR Voltage Control Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.  Wake up hour/minute/second: Set the time at which the system will be powered on automatically.  Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. (Default: Auto) `` Hardware Monitor && CPU Temperature (DTS)/System Temperature && CPU/System Fan Speed Displays current CPU/system temperature. Displays the current system voltages. && Vcore/VCC3/+12V/VCC/CPU_VAXG/3VDUAL/DDR1_35VIO `` Intel(R) Smart Connect Technology && ISCT Support Enables or disables Intel® Smart Connect Technology. (Default: Disabled) `` SIO Misc Functions && ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm, PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. - 18 - && AC BACK Determines the state of the system after the return of power from an AC power loss. Memory  The system returns to its last known awake state upon the return of the AC power. Always On  The system is turned on upon the return of the AC power. (Default)  The Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Open", otherwise it will show "Close. " To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. Disabled   Keeps or clears the record of previous chassis intrusion status. (Default) Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. Allows you to determine whether to display the GIGABYTE Logo at system startup. (Default: Disabled) && Case Open && Reset Case Open Status && Case intrusion Prompt `` CPU Configuration `` Socket 0 CPU Information && Limit CPUID Maximum This section provides information on your CPU, frequency, and cache memory. && Execute Disable Bit Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4. 0. (Default: Disabled) Enables or disables Intel® Execute Disable Bit function. This function may enhance protection for the computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its supporting software and system. (Default: Enabled) Enables or disables L2 prefetching of adjacent cache lines. (Default: Enabled) && Hardware Prefetcher && Adjacent Cache Line Prefetch && Intel Virtualization Technology && Power Technology Enables or disables Intel® Virtualization Technology. [. . . ] To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals. Waste Electrical & Electronic Equipment (WEEE) Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2002/96/EC WEEE (Waste Electrical and Electronic Equipment) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. [. . . ]