User manual GIGABYTE GA-H97M-D3H

[. . . ] „„ For product-related information, check on our website at: http://www. gigabyte. com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X. X. " For example, "REV: 1. 0" means the revision of the motherboard is 1. 0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information. Example: Table of Contents GA-H97M-D3H Motherboard Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GA-H97M-D3H Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1-1 1-2 1-3 1-4 1-5 1-6 1-7 Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For more information about Intel® CPUs' unique features, please visit Intel's website. - 18 - && CPU Thermal Monitor (Note 1) && CPU EIST Function (Note 1) Enables or disables Intel® Thermal Monitor function, a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. (Default: Auto) Enables or disables Enhanced Intel® Speed Step Technology (EIST). Depending on CPU loading, Intel® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Auto) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. (Default: Auto) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings. && Extreme Memory Profile (X. M. P. ) (Note 2) && System Memory Multiplier && Memory Frequency (MHz) `` Advanced Memory Settings &&  xtreme Memory Profile (X. M. P. ) (Note 2), System Memory Multiplier, Memory Frequency(MHz) E && Memory Enhancement Settings && Memory Timing Mode The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. Provides three different memory performance enhancement settings: Normal (basic performance), Enhanced Stability, and Enhanced Performance. (Default: Normal) Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing settings below to be configurable. When using a non-XMP memory module or Extreme Memory Profile (X. M. P. ) is set to Disabled, this item will display as 1. 50V. When Extreme Memory Profile (X. M. P. ) is set to Profile1 or Profile2, this item will display the value based on the SPD data on the XMP memory. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. This item is configurable only when CPU Fan Speed Control is set to Manual. Allows you to determine whether to enable the system fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the system temperature. You can  adjust the fan speed with EasyTune based on your system requirements. Manual  Allows you to control the fan speed under the Fan Speed Percentage item. - 20 - && Fan Speed Percentage Allows you to control the system fan speed. This item is configurable only when System Fan Speed Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. `` Miscellaneous Settings && PCIe Slot Configuration && 3DMark01 Boost Allows you to set the operation mode of the PCI Express slots to Gen 1 or Gen 2. Actual operation mode is subject to the hardware specification of each slot. (Default: Auto) Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled) 2-3 System Information This section provides information on your motherboard model and BIOS version. [. . . ] Press <Enter> on the device you select and select Yes to confirm. This function allows you to save the current BIOS settings to a profile. You can create up to 8 profiles and save as Setup Profile 1~ Setup Profile 8. Or you can select Select File in HDD/USB/FDD to save the profile to your storage device. [. . . ]