User manual GIGABYTE GA-H61M-DS2

[. . . ] The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] If this occurs, clear the CMOS values and reset the board to default values. 584 V ESC: Exit F1: General Help F7: Optimized Defaults +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults This section provides information on the BIOS version, CPU base clock, CPU frequency, memory frequency, total memory size , CPU temperature, Vcore, and memory voltage. [Auto] -Turbo Ratio(1-Core)(Note) 34 Auto -Turbo Ratio(2-Core)(Note) 33 Auto (Note) -Turbo Ratio(3-Core) 33 Auto (Note) -Turbo Ratio(4-Core) 32 Auto -Turbo Power Limit(Watts) 95 [Auto] -Core Current Limit(Amps) 97 [Auto] CPU Cores Enabled (Note) [All] CPU Multi-Threading (Note) [Enabled] CPU Enhanced Halt (C1E) (Note) [Auto] C3/C6 State Support (Note) [Auto] CPU Thermal Monitor (Note) [Auto] (Note) CPU EIST Function [Auto] Bi-Directional PROCHOT (Note) [Auto] Item Help Menu Level  Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CPU Clock Ratio CPU Frequency Allows you to alter the clock ratio for the installed CPU. (Note)  This item is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. (Note) Turbo Ratio (1-Core)/(2-Core)/(3-Core)/(4-Core) (Note) Turbo Power Limit (Watts) Allows you to determine whether to enable the Intel CPU Turbo Boost technology. (Default: Auto) Allows you to set the CPU Turbo ratios for different number of active cores. When the CPU power consumption exceeds the specified power limit, the CPU will automatically reduce the core frequency in order to reduce the power. When the CPU current exceeds the specified current limit, the CPU will automatically reduce the core frequency in order to reduce the current. (Default: Auto) Core Current Limit (Amps) CPU Cores Enabled (Note) CPU Multi-Threading (Note) Allows you to determine whether to enable all CPU cores. Allows you to determine whether to enable multi-threading technology when using an Intel CPU that supports this function. This feature only works for operating systems that support multi-processor mode. (Default: Enabled) Enables or disables Intel CPU Enhanced Halt (C1E) function , a CPU power-saving function in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. (Default: Auto) Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. (Default: Auto) Enables or disables Intel CPU Thermal Monitor function , a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. (Default: Auto) Enables or disables Enhanced Intel SpeedStep Technology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Auto) CPU Enhanced Halt (C1E) (Note) C3/C6 State Support (Note) CPU Thermal Monitor (Note) CPU EIST Function (Note) (Note)  This item is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. [. . . ] N Load Fail-Safe Defaults Save & Exit Setup Exit Without Saving : Select Item F10: Save & Exit Setup Load Fail-Safe Defaults F11: Save CMOS to BIOS F12: Load CMOS from BIOS ESC: Quit F8: Q-Flash Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. Exit Setup PC Health Status Exit Without Saving : Select Item F10: Save & Exit Setup Load Optimized Defaults F11: Save CMOS to BIOS F12: Load CMOS from BIOS ESC: Quit F8: Q-Flash Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state. [. . . ]