User manual GIGABYTE GA-F2A88XN-WIFI

[. . . ] 3001 12ME-F288NWF-3001R Motherboard GA-F2A88XN-WIFI Motherboard GA-F2A88XN-WIFI Aug. 26, 2013 Wireless Module Country Approvals: See the latest safety and regulatory documents at GIGABYTE's website. Copyright © 2013 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. [. . . ] Enables or disables High Precision Event Timer (HPET) for Windows 8/7 operating system. (Default: Enabled) Configures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off  Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend mode. Determines the state of the system after the return of power from an AC power loss. Memory  The system returns to its last known awake state upon the return of the AC power. Always On  The system is turned on upon the return of the AC power. Always Off  T  he system stays off upon the return of the AC power. (Default) && HPET Support && Soft-Off by PWR-BTTN && AC BACK (Note) Supported on Windows 8/7 operating system only. - 50 - BIOS Setup && Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. (Default) Password  Set a password with 1~5 characters to turn on the system. Keyboard 98   Press POWER button on the Windows 98 keyboard to turn on the system. Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. When prompted for the password, press <Enter> again without entering the password to clear the password settings. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Double Click   Double click on left button on the mouse to turn on the system. Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. && Power On Password && Power On By Mouse && ErP - 51 - BIOS Setup 2-8 Save & Exit && Save & Exit Setup Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Press <Enter> on this item and select Yes to load the optimal BIOS default settings. [. . . ] •• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •• Consult a dealer or experienced TV/radio technician for help. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Neither the Dealer nor the Manufacturer are responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. [. . . ]