User manual GIGABYTE GA-B85N PHOENIX-WIFI

[. . . ] 1101 12ME-B85NPHW-1101R Motherboard GA-B85N Phoenix-WIFI Motherboard GA-B85N Phoenix-WIFI Jan. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. `` Advanced Voltage Settings `` PC Health Status && Reset Case Open Status This sub-menu allows you to set CPU, chipset and memory voltages. && Case Open Disabled  Keeps or clears the record of previous chassis intrusion status. (Default) Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. - 22 - && CPU Vcore/CPU VRIN/Dram Voltage/+3. 3V/+5V/+12V/CPU VAXG && CPU/System Temperature && CPU/System Fan Speed && CPU Fan Speed Control Displays the current system voltages. Displays current CPU/system temperature. Displays current CPU/system fan speeds. && Fan Speed Percentage Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal   Allows the fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. Manual  Allows you to control the fan speed under the Fan Speed Percentage item. This item is configurable only when CPU Fan Speed Control is set to Manual. Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the system temperature. You can  adjust the fan speed with EasyTune based on your system requirements. Manual  Allows you to control the fan speed under the Fan Speed Percentage item. This item is configurable only when System Fan Speed Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. && System Fan Speed Control && Fan Speed Percentage `` Miscellaneous Settings && PCIe Slot Configuration && 3DMark01 Boost Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation mode is subject to the hardware specification of each slot. (Default: Auto) Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled) - 23 - 2-3 System Information This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language && System Date Selects the default language used by the BIOS. && System Time Sets the system date. Use <Enter> to switch between the Month, Date, and Year fields and use the <Page Up> or <Page Down> key to set the desired value. [. . . ] Industry Canada requires this product to be used indoors for the frequency range of 5. 15 GHz to 5. 25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5. 25- to 5. 35-GHz and 5. 65 to 5. 85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E. I. R. P limit for the 5. 25- to 5. 35 and 5. 725 to 5. 85 GHz frequency range in point-to-point operation. [. . . ]