User manual GIGABYTE GA-990FXA-UD3 R5

[. . . ] 1001 12ME-990U3R5-1001R Motherboard GA-990FXA-UD3 R5 Motherboard GA-990FXA-UD3 R5 Feb. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] Configures the operating mode of the integrated SATA3 4~SATA3 5 connectors.  IDE  D  isables RAID for the SATA controller and configures the SATA controller to IDE mode. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. - 47 BIOS Setup && OnChip SATA Port4/5 Type (SATA3 4~SATA3 5 connectors) && HD Audio Azalia Device && Onboard USB Device Enables or disables the integrated USB controller. (Default: Enabled) && Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. (Default: Enabled) Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled) && Onboard USB3. 0 Controller (VIA® VL805 USB Controller) && Onboard eSATA Controller (Marvell® 88SE9172 chip, eSATA connectors on the back panel) && Legacy USB Support && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) Displays a list of connected USB mass storage devices. (Default: Enabled) && EHCI Hand-off && Port 60/64 Emulation && USB Storage Devices && IOMMU Controller `` Trusted Computing && TPM SUPPORT Enables or disables Trusted Platform Module (TPM). (Default: Disable) BIOS Setup - 48 - `` SB SATA Configuration && SATA Hot Plug on PORT0~SATA Hot Plug on PORT5 Enables or disable the hot plug capability for each SATA port. (Default: Enabled) && SATA Power on PORT0~SATA Power on PORT5 `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. (Default: Enabled) && Serial Port A - 49 - BIOS Setup `` Marvell SATA Controller Configuration && GSATA Controller (Marvell® 88SE9172 Chip, eSATA connectors on the back panel) Enables or disables RAID for the SATA controller integrated in the Marvell® 88SE9172 chip or configures the SATA controller to AHCI mode. IDE Mode  D  isables RAID for the SATA controller and configures the SATA controller to IDE mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) RAID Mode  Enables RAID for the SATA controller. BIOS Setup - 50 - 2-7 Power Management && Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.  Wake up hour/minute/second: Set the time at which the system will be powered on automatically.  Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. - 95 - Appendix FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]