Detailed instructions for use are in the User's Guide.
[. . . ] GA-8IPE1000 Series
Intel® Pentium® 4 Processor Motherboard
User's Manual
Rev. 4002 12ME-8IPE1K4-4002
Motherboard GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000
Motherboard
GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000
Nov. The trademarks mentioned in the manual are legally registered to their respective companies.
Notice
The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. [. . . ] (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 4.
PCI 2 IRQ Assignment
Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
PCI 3 IRQ Assignment
Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
PCI 4 IRQ Assignment
Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
- 41 -
BIOS Setup
English
2-6
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Current CPU Temperature Vcore DDR25V +3. 3V +12V Current CPU FAN Speed Current SYSTEM FAN Speed 50oC 1. 35V 2. 39V 3. 28V 12. 09V 3308 RPM 0 RPM Item Help Menu Level
: Move Enter: Select F5: Previous Values
+/-/PU/PD: Value F6: Fail-Save Defaults
F10: Save
ESC: Exit F1: General Help F7: Optimized Defaults
Current CPU Temperature
Detect CPU temperature automatically.
Current Voltage(V) Vcore / DDR25V / +3. 3V / +12V
Detect system's voltage status automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
GA-8IPE1000 Series Motherboard
- 42 -
2-7
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Frequency/Voltage Control [15X] [Disabled] 133 66/33/100 [Auto] 266 66/33/100 [Normal] [Normal] [Normal] Item Help Menu Level Set CPU Ratio if CPU Ratio is unclocked
English
CPU Clock Ratio CPU Host Clock Control x CPU Host Frequency (Mhz) x AGP/PCI/SRC Fixed Memory Frequency For Memory Frequency (Mhz) AGP/PCI/SRC Frequency (Mhz) DIMM OverVoltage Control AGP OverVoltage Control CPU OverVoltage Control
: Move Enter: Select F5: Previous Values
+/-/PU/PD: Value F6: Fail-Save Defaults
F10: Save
ESC: Exit F1: General Help F7: Optimized Defaults
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and read only if the CPU ratio is not changeable.
CPU Host Clock Control
Disabled Enabled Disable CPU host clock control. (Default value) Enable CPU host clock control.
CPU Host Frequency(Mhz)
This item will be available when CPU Host Clock Control is set to Enabled. If you use a 400Mhz FSB processor, please set CPU Host Frequency to 100Mhz. If you use a 533Mhz FSB processor, please set CPU Host Frequency to 133Mhz. If you use an 800Mhz FSB processor, please set CPU Host Frequency to 200Mhz.
AGP/PCI/SRC Fixed
Adjust AGP/PCI/SRC clock asynchronous with CPU.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue. for FSB(Front Side Bus) frequency =400Mhz, 2. 66 Memory Frequency = Host clock x 2. 66. (Default value) for FSB(Front Side Bus) frequency=533Mhz, 2. 0 Memory Frequency = Host clock x 2. (Default value) - 43 BIOS Setup
for FSB(Front Side Bus) frequency=800Mhz, 1. 33 Memory Frequency = Host clock x 1. 33. (Default value)
English
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz) and Memory Frequency For.
AGP/PCI/SRC Frequency (Mhz)
The values depend on AGP/PCI/SRC Fixed item.
DIMM OverVoltage Control
Normal +0. 1V +0. 2V Normal +0. 1V +0. 2V +0. 3V Normal +5. 0% +7. 5% +10. 0% Set DIMM OverVoltage Control to Normal. Set CPU OverVoltage Control to +10. 0%.
AGP OverVoltage Control
CPU OverVoltage Control
GA-8IPE1000 Series Motherboard
- 44 -
2-8
Load Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Fail-Safe DefaultsSave & Exit Setup (Y/N)?N Exit Without Saving : Select Item F10: Save & Exit Setup Load Fail-Safe Defaults
English
Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance.
2-9
Load Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Optimized Defaults (Y/N)?Exit Setup Save & N Exit Without Saving : Select Item F10: Save & Exit Setup Load Optimized Defaults
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects.
- 45 -
BIOS Setup
English
2-10 Set Supervisor/User Password
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Enter Password: PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item F10: Save & Exit Setup Change/Set/Disable Password
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. When you select this function, the following message will appear at the center of the screen to assist you in creating a password. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup.
GA-8IPE1000 Series Motherboard
- 46 -
2-11 Save & Exit Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Save to CMOS and EXIT (Y/N)? [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg Deutschland TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]