User manual GIGABYTE GA-8GEM800

[. . . ] GA-8GEM800 Intel® Pentium® 4 Socket 478 Processor Motherboard User's Manual Rev. 1001 12ME-8GEM800-1001 Motherboard GA-8GEM800 Motherboard GA-8GEM800 Sept. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. [. . . ] Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Load Fail-Safe Defaults English Esc: Quit F8: Q-Flash Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. 2-10 Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Optimized Defaults (Y/N)?N Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Load Optimized Defaults Esc: Quit F8: Q-Flash Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. - 45 - BIOS Setup English 2-11 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Enter Password: PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Change/Set/Disable Password Esc: Quit F8: Q-Flash Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. When you select this function, the following message will appear at the center of the screen to assist you in creating a password. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup. GA-8GEM800 Motherboard - 46 - 2-12 Save & Exit Setup CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Save to CMOS and EXIT (Y/N)?Y Password Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Save & Exit Setup English Esc: Quit F8: Q-Flash Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. Type "N" will return to Setup Utility. 2-13 Exit Without Saving CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Quit Without Saving (Y/N)?N Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Abandon all Data Esc: Quit F8: Q-Flash Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility. - 47 - BIOS Setup English GA-8GEM800 Motherboard - 48 - Chapter 3Drivers Installation Pictures below are shown in Windows XP. (1) Please make sure to install the latest service pack for Windows after OS installation and before installing motherboard drivers. (2) Insert the driver CD that came with your motherboard into your CD-ROM drive, the driver CD will auto start and installation screen will appear. If not, please double click the CD-ROM device icon in My computer or execute the Setup. exe in the root directory of the driver CD. English 3-1 Install Chipset Drivers to install the drivers automatically. This page shows the drivers that need to be installed for the system. Click each item to install the driver manually or click the Xpress Install button Click the Xpress Install button to install drivers automatically. Or click one driver at one time to install it manually. The Xpress Install uses the"Click and Go" technology to install the drivers automatically. Just select the drivers you want then click the "GO" button. After restarting your system the "Xpress Install" will continue to install other drivers. System will reboot automatically after installing the drivers, afterward you can install others applications. [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com -- Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) TEL: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]