User manual GIGABYTE GA-7PPSH

[. . . ] 10 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Installing the CPU and CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installing the CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installing the CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Four Channel Memory Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Installing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 DIMM Population Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1-3-1 1-3-2 1-4 Installing the Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1-4-1 1-4-2 1-4-3 1-5 1-6 1-7 2-1 2-2 Back Panel Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Set the system time following the hour-minute- second format. System Time BIOS Setup - 42 - 2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. - 43 - BIOS Setup 2-2-1 PCI Subsystem Settings PCI Express Slot 1/2/3/4 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Disabled. Onboard LAN1/2 Controller Onboard LAN I/O ROM Option Onboard LAN1/2 I/O ROM PCI 64bit Resources Handling Above 4G Decoding PCI Common Settings PCI Latency Timer Enable/Disable Above 4G Decoding. Default setting is Disabled. Configure PCI Latency Timer. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks. - 44 - BIOS Setup VGA Platte Snoop Enable/Disable VGA Palette Tegisters Snooping. When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI. Default setting is Disabled. PERR Generation SERR Generation - 45 - BIOS Setup 2-2-1-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Wnen this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Select whether to enable the speculative prefetch unit of the processor. Enable prefetch of next L1 Data line based upon multiple loads in same cache line. Enable prefetch of next L1 Data line based upon sequential load history. Select whether to enable the Intel Virtualization Technology function. VT allows a single platform to run multiple operating systems in independent partitions. Default setting is Enabled. Execute Disable Bit Hardware Prefetcher Adjacent Cache Line Prefetch DCU Streamer Prefetch DCU IP Prefetch Intel Virtualization Technology - 51 - BIOS Setup 2-2-3-1 CPU Power Management Configuration CPU Power Management Configuration Power Technology EIST (Enhanced Intel SpeedStep Technology) Configure the power management features. Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. When this item is enabled, tje processor will automatically ramp up the clock speed of 1-2 of its processing cores to improve its performance. When this item is disabled, the processor will not overclock any of its core. In HW_ALL mode, the processor hardware is responsible for coordinating the P-state among logical processors dependencies. The OS is responsible for keeping the P-state request up to date on all logical processors. [. . . ] • If the Launch CSM is set to Disabled, the following five items will not be able to support Legacy mode. Default setting is Legacy only. Boot option filter Launch PXE OpROM policy Launch Storage OpROM policy Launch Video OpROM policy Determines which devices system will boot to. For PCI devices other than Network, Mass storage or Video device, defines which OpROM to launch. - 92 - Other PCI device ROM priority BIOS Setup 2-7 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. [. . . ]