User manual GIGABYTE GA-78LMT-S2PT

[. . . ] 3102 12ME-78LMT2T-3102R Motherboard GA-78LMT-S2PT Motherboard GA-78LMT-S2PT Nov. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Enabled allows the system to simultaneously access different banks of the memory to increase memory performance and stability. (Default: Enabled) Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS) Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled) & DQS Training Control & Memclock tri-stating ******** System Voltage Optimized ******** & System Voltage Control & DDR3 Voltage Control Determines whether to manually set the system voltages. (Default) +0. 100V ~ +0. 300V The adjustable range is from 0. 100V to 0. 300V. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. & NorthBridge Volt Control & SouthBridge Volt Control & CPU NB VID Control - 25 - & CPU Voltage Control & Normal CPU Vcore Allows you to set the CPU voltage. (Default: Auto) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. Displays the normal operating voltage of your CPU. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Wed, Nov 9 2011 22:31:24 [None] [None] [None] [None] [None] [None] [None] [None] [All, But Keyboard] 640K 766M +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Item Help Menu Level ` ` ` ` ` ` ` ` ` IDE Channel 0 Master IDE Channel 0 Slave IDE Channel 1 Master IDE Channel 1 Slave IDE Channel 2 Master IDE Channel 2 Slave IDE Channel 3 Master IDE Channel 3 Slave Halt On Base Memory Extended Memory Enter: Select : Move F5: Previous Values & Date (mm:dd:yy) & Time (hh:mm:ss) Sets the system date. Sets the system time. & IDE Channel 0, 1 Master/Slave & IDE Channel 2/3 Master/Slave IDE Channel 0, 1 Master/Slave Configure your SATA devices by using one of the three methods below: · None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. · Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) · Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. Extended IDE Drive Configure your SATA devices by using one of the two methods below: · Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) · None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. - 26 - & Halt On & Memory Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors, " "No Errors, " "All, But Keyboard". (Default) These fields are read-only and are determined by the BIOS POST. 2-5 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Advanced BIOS Features [Press Enter] [Auto] [Disabled] [Auto] [Auto] [Disabled] [Auto] Enabled Enabled Enabled Enabled Enabled Enabled [Press Enter] [Auto] [Hard Disk] [CDROM] [USB-HDD] [Setup] +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save Item Help Menu Level ` ` IGX Configuration AMD C1E Support Virtualization AMD K8 Cool&Quiet control AMD APM Master Mode CPU Unlock (Note) CPU core Control x CPU core 0(Note) x CPU core 1(Note) x CPU core 2(Note) x CPU core 3(Note) x CPU core 4(Note) x CPU core 5(Note) ` Hard Disk Boot Priority EFI CD/DVD Boot Option First Boot Device Second Boot Device Third Boot Device Password Check Enter: Select : Move F5: Previous Values ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Advanced BIOS Features HDD S. M. A. R. T. Capability Away Mode Full Screen LOGO Show Backup BIOS Image to HDD Init Display First [Disabled] [Disabled] [Enabled] [Disabled] [PCI Slot] Item Help Menu Level ` Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults (Note) This item is present only when you install a CPU that supports this feature. - 27 - & IGXConfiguration & AMD C1E Support The settings in this submenu are synchronous to those under the same items on the MB Intelligent Tweaker(M. I. T. ) main menu. Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power consumption will be reduced during system halt state. Auto If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the hardware C1E function. [. . . ] To copy the RAID driver for Windows XP, copy all files in the \BootDrv\SBxxx\x86 folder in the motherboard driver disk to your floppy disk. (To install Windows 64-bit, copy the files in the x64 folder. ) Installing the SATA RAID Driver and Operating System A. Installing Windows XP Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver. " Insert the floppy disk containing the SATA RAID driver. Follow the on-screen instructions to install the driver that suits your operating system. [. . . ]