User manual GIGABYTE GA-6LASL

[. . . ] 9 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installing the CPU and CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Dual Channel Memory Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1-3-1 1-3-2 1-4 Installing the Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1-4-1 1-4-2 1-5 1-6 2-1 2-2 Back Panel Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Default setting is Disabled. Extended Tag No Snoop Maximum Playload Maximum Read Request Extended Synch - 40 - BIOS Setup Link Training Retry Define the number of Retry Attempts software wil take to retrain the link if previous training attempt was unsuccessful. Press <+> / <-> keys to increase or decrease the desired values. Link Training Timeout (us) Unpopulated Links Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press <+> / <-> keys to increase or decrease the desired values. When this item is set to 'Disable Link, the system will operate power save feature for those unpopulated PCI Express links. Default setting is Keep Link ON. Restore PCIE Registers When this item is enabled, the system will restore PCI Express device configuration on S3 resume. Warning: Enabling this may cause issues with other hardware after S3 resume. Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup - 41 - 2-2-4 CPU Configuration - 42 - BIOS Setup CPU Configuration CPU Type/Signature/Processor Family/Microcode Patch/FSB Speed/Max CPU Speed/ Min CPU Speed/ rocessor Cores/Intel HT Technology/Intel VT-x Technology/ P Intel SMX Technology 64-bit Displays the technical specifications for the installed processor. Display the support information of CPU C7 state feature. EIST Technology CPU C3 state CPU C6 state CPU C7 state Cache Information L1 Data Cache / L1 Code Cache / L2 Cache / L3 Cache Hyper-threading Displays the technical specifications for the installed processor. The Intel Hyper Threading Technology allows a single processor to execute two or more separate threads concurrently. When hyper-threading is enabled, multi-threaded software applications can execute their threads, thereby improving performance. - 43 - BIOS Setup Active Processor Cores (Note) Overclocking lock Allows you to determine whether to enable all CPU cores. Default setting is Disabled. CPU DTS (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. - 46 BIOS Setup 2-2-5 SATA Configuration BIOS Setup - 47 - SATA Controller(s) Enable/Disable the SATA controller. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. ACHI Mode: When set to AHCI, the SATA controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Press [Enter] for configuration of advanced items. SATA Mode Selection SATA Test Mode Aggressive LPM Support SATA Controller Speed Software Feature Mask Configuration Serial Port 0/1/2/3/4/5 Port 0/1/2/3/4/5 The category identifies Serial ATA type of hard disk that are installed in the computer. System will automatically detect HDD type. Enable/Disable Port 0/1/2/3/4/5. On an edge detect from 0 to 1, the PCH starts a COMreset initialization to the device. Default setting is Disabled. Hot Plug (for Serial SATA Port 0/1/2/3/4/5) External SATA (for Serial SATA Port 0/1/2/3/4/5) SATA Device Type (for Serial SATA Port 0/1) Spin Up Device (for Serial SATA Port 0/1/2/3/4/5) - 48 - BIOS Setup 2-2-5-1 Software Feature Mask Configuration RAID 0 Enable/Disable RAID 0 feature. [. . . ] Options available: Do not launch/UEFI only/Legacy only/Legacy first/UEFI first. - 90 BIOS Setup Boot option filter Launch PXE OpROM policy Launch Storage OpROM policy Launch Video OpROM policy Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video device, defines which OpROM to launch. Default setting is UEFI OpROM. BIOS Setup - 91 - 2-8 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. [. . . ]