User manual GIGABYTE G1.SNIPER Z5S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE G1.SNIPER Z5S. We hope that this GIGABYTE G1.SNIPER Z5S user guide will be useful to you.
You may also download the following manuals related to this product:
GIGABYTE G1.SNIPER Z5S (35715 ko)
GIGABYTE G1.SNIPER Z5S (35715 ko)
GIGABYTE G1.SNIPER Z5S (34616 ko)
Manual abstract: user guide GIGABYTE G1.SNIPER Z5S
Detailed instructions for use are in the User's Guide.
[. . . ] 1101 12ME-G1SNZ5S-1101R
Motherboard G1. Sniper Z5S
Motherboard
G1. Sniper Z5S
Dec. The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] (Default) PCIe 2 Slot Sets the graphics card on the PCIEX8 slot as the first display. PCIe 3 Slot Sets the graphics card on the PCIEX4 slot as the first display. Allows you to determine the operating mode for the xHCI controller in OS. Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to Auto, but it adds the capability to route the ports to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the pre-boot environment. xHCI controller enabling and rerouting should follow the steps in Auto, when previous boot routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI preboot support. (Default) Auto BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to provide an option to enable the xHCI controller and reroute the sharable ports. Note: This is the recommended mode when BIOS does NOT have xHCI pre-boot support. Enabled All shared ports are eventually routed to the xHCI controller during the BIOS boot process. If BIOS does not have pre-boot support for the xHCI controller, it should initially route the sharable ports to the EHCI controller and then prior to OS boot it should route the ports to xHCI controller. If the OS does not provide support, all sharable ports won't work. Disabled USB 3. 0 ports are routed to the EHCI controller and the xHCI controller is turned The off. All USB 3. 0 devices function as High Speed devices regardless of xHCI software support/availability. - 50 -
&& XHCI Mode (Intel® Z87 Chipset)
BIOS Setup
Manual Allows you to determine whether to rout the USB 3. 0 ports to the xHCI or EHCI controller before booting to OS, and also provides you with options to manually rout each USB 3. 0/2. 0 port to xHCI or EHCI.
&& Audio Controller
Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. (Default: Enabled)
&& Audio LED
&& USB DAC Power
Enables or disables the power for the USB DAC connector on the back panel. (Default: Enabled)
&& Intel Processor Graphics
&& Intel Processor Graphics Memory Allocation
&& DVMT Total Memory Size
Allows you to set the onboard graphics memory size. (Default: 64M)
Allows you to allocate the DVMT memory size of the onboard graphics. (Default: MAX)
&& Intel(R) Rapid Start Technology
&& Legacy USB Support
Enables or disables Intel® Rapid Start Technology. (Default: Enabled)
&& XHCI Hand-off && EHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. [. . . ] If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly.
- 101 -
Appendix
FCC Notice (U. S. A. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE G1.SNIPER Z5S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE G1.SNIPER Z5S will begin.