User manual GIGABYTE G1.SNIPER Z5

[. . . ] 1101 12ME-G1SNZ5-1101R Motherboard G1. Sniper Z5 Motherboard G1. Sniper Z5 Jan. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] Enabled All shared ports are eventually routed to the xHCI controller during the BIOS boot process.  If BIOS does not have pre-boot support for the xHCI controller, it should initially route the sharable ports to the EHCI controller and then prior to OS boot it should route the ports to xHCI controller. If the OS does not provide support, all sharable ports won't work. Disabled  USB 3. 0 ports are routed to the EHCI controller and the xHCI controller is turned  The off. All USB 3. 0 devices function as High Speed devices regardless of xHCI software support/availability. - 50 - && XHCI Mode (Intel® Z87 Chipset) BIOS Setup Manual Allows you to determine whether to rout the USB 3. 0 ports to the xHCI or EHCI controller  before booting to OS, and also provides you with options to manually rout each USB 3. 0/2. 0 port to xHCI or EHCI. && Audio Controller Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. (Default: Enabled) && Audio LED && USB DAC Power Enables or disables the power for the USB DAC connector on the back panel. (Default: Enabled) && Intel Processor Graphics && Intel Processor Graphics Memory Allocation && DVMT Total Memory Size Allows you to set the onboard graphics memory size. (Default: 64M) Allows you to allocate the DVMT memory size of the onboard graphics. (Default: MAX) && Intel(R) Rapid Start Technology && Legacy USB Support Enables or disables Intel® Rapid Start Technology. (Default: Enabled) && XHCI Hand-off && EHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Displays a list of connected USB mass storage devices. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. Auto  L  ets the BIOS automatically configure this setting depending on the expansion card being installed. x1  PCIEX4 operates at x1 mode. && USB Storage Devices && OnBoard LAN Controller && PCIE Slot Configuration - 51 - BIOS Setup `` SATA Configuration && Integrated SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) `` Serial ATA Port 0/1/2/3/4/5 && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) Enables or disable the hot plug capability for each SATA port. (Default: Disabled) Enables or disables support for external SATA devices. [. . . ] ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. - 101 - Appendix FCC Notice (U. S. A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]