User manual GIGABYTE G1-SNIPER A88X

[. . . ] 3001 12ME-G1SNP88-3001R Motherboard G1. Sniper A88X Motherboard G1. Sniper A88X Aug. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] (Note 2) This item is present only when you install a CPU and a memory module that support this feature. - 21 - && DRAM Timing Selectable && Profile DDR Voltage Quick and Expert allows the memory timing settings below to be configurable. When using a non-XMP memory module or Extreme Memory Profile (X. M. P. ) is set to Disabled, this item will display as 1. 50V. When Extreme Memory Profile (X. M. P. ) is set to Profile1 or Profile2, this item will display the value based on the SPD data on the XMP memory. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. (Default: Enabled) && Profile VTT Voltage && Rank Interleaving && Channel Interleaving `` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory. The respective timing setting screens are configurable only when DRAM Timing Selectable is set to Quick or Expert. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. `` Advanced Voltage Settings `` PC Health Status && Reset Case Open Status This sub-menu allows you to set CPU, chipset and memory voltages. && Case Open Disabled  Keeps or clears the record of previous chassis intrusion status. (Default) Enabled   Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. Displays the current system voltages. && CPU Vcore/DRAM Voltage/+3. 3V/+5V/+12V && CPU/System Temperature && CPU/1st System/2nd System Fan Speed && CPU Warning Temperature Displays current CPU/system fan speeds. When CPU temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF. Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled) Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal   Allows the fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) - 22 - Displays current CPU/system temperature. && CPU/1st System/2nd System Fan Fail Warning && CPU Fan Speed Control (CPU_FAN Connector) && Slope PWM Silent  Allows the fan to run at slow speeds. Manual Allows you to control the fan speed under the Slope PWM item. [. . . ] Step 3: On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. - 33 - 3-2 Drivers Installation •• Before installing the drivers, first install the operating system. (The following instructions use Windows 8 as the example operating system. ) •• After installing the operating system, insert the motherboard driver disk into your optical drive. [. . . ]