User manual GIGABYTE 3D MARS

[. . . ] (http://www. gigabyte. com. tw) The following are not covered by the warranty: 1. Using the product incorrectly or in a manner other than the designed purpose. 2. Nonobservance of the proper operation provided 3. Malfunction due to interference from other devices 4. Unapproved modification of the product 5. Consequential damage to other objects due to the product's fault. [. . . ] Aluminum 3D front panel design with hair-line brush anodized finishing. Removable/Dual directional HDD rack. - Complete Support Complete front panel multi-media support, include 2 x USB 2. 0, 1 x IEEE1394, 1 x Audio Set (HD & AC'97). Supports ATX / Micro ATX / Flex ATX / CEB motherboards. - Integration of Cooling Technology Aluminum alloy chassis for accelerating system cooling performance. Unique illuminated front air intake design. - System Security Side panel security lock to provide optimal system security. 1. 0mm reinforced aluminum structure. - Convenience of assembly Scratch-resistant processing that ensures safety during assembly. Single handed latch to open side panel, for easy disassembly. English 3. Specification Model Case Type Size Front Bezel Material Color Side Panel Body Material Net weight 5. 25" drive bay (external) 3. 5" drive bay (external) 3. 5" drive bay (internal) PCI slot Motherboard size System Fan (Front) System Fan (Rear) Multi-Media I/O port GZ-FA2CA-AJS/AJB FULL TOWER 205 x 522 x 565mm (W x H x D) Aluminum Silver/Black Ventilated Mesh / Transparent Aluminum (1. 0mm) 8KG 5 1 5 7 ATX / Micro ATX / Flex ATX / CEB 1 x 12cm Silent Blue LED fan (1000 RPM) 2 x 12cm Silent Blue LED fan (1000 RPM) 2 x USB 2. 0 / 1 x IEEE1394 1 x Audio Set HD & AC'97 English 4. Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. Required Tools: Power supply securing screw x 4 1. 1 1. 2 1. 3 Remove side panel (see step 1-3. 1 on page 6). Place the power supply unit into the case. Secure the power supply with the 4 securing screws. When using a larger power supply unit, Please disassemble the cross bar by loosening the securing screws. Fasten the screws to secure the cross bar after the power supply is installed. 4-2 Installation of Motherboard This chassis supports ATX / Micro ATX / Flex-ATX / CEB motherboards. Please confirm the dimensions and fixing points of the motherboard prior to installation. Required Tools: Copper stand offs, Motherboard screws According to motherboard specifications, select proper screw points, screw in the copper stand offs into the corresponding points on the motherboard. 2. 1 2. 2 Change the motherboard I/O bracket on the rear panel (supplied by the motherboard manufacturer). Secure the motherboard with the motherboard screws (refer to your motherboard manual to check what type of motherboard you have). Motherboard ATX Micro ATX Flex-ATX E-ATX Code name A1-A9 U1-U9 F1-F6 E1-E12 Motherboard screws 9 9 6 12 case copper post 9 9 6 12 2. 3 English 4-3 Installation of Add-On Card This chassis supports tool-free installation of interface cards, e. g. graphics cards, sound cards, and etc. Required Tools: None 3. 1 3. 2 3. 3 Unlock the PCI slot retention lock. Remove the internally attached dust proof PCI cover. Insert the interface card carefully into the expansion slot and lock the PCI slot retention lock. 4-4 Installation of Front Multi-Media I/O Ports Incorrect connection of sockets can cause the motherboard to malfunction or completely destroy the motherboard. [. . . ] Swivel the foot support 90° according to the diagram to open or retract. 1 English When moving or laying down the chassis, please swivel the foot support to the closed position, to prevent bending and damage 4-12 Application of Liquid Cooling System This chassis fully supports Gigabyte Tech. 3D Galaxy series liquid cooling system (also supports most of the liquid cooling systems currently available). [. . . ]