User manual GIANT HALFWAY SUPPLEMENT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIANT HALFWAY. We hope that this GIANT HALFWAY user guide will be useful to you.
Manual abstract: user guide GIANT HALFWAYSUPPLEMENT
Detailed instructions for use are in the User's Guide.
[. . . ] NEW HALFWAY/SUBWAY OWNER'S MANUAL SUPPLEMENT
Your bike
9 12
10
13
2 11
1
3 5 8 5 6 7 4
1
1.
Frame
2. Handlebar stem w / quick release
Why you should read this manual.
Thank you for buying Giant bicycles. [. . . ] Before your first ride, please set your proper height following below procedure picture
1. Pull the seat post out to the maximum extended position (Until stopper touches seat clamp) 2. Don't remove the Allen key; otherwise the stopper might fall out.
Caution:
Warnings !
Be sure to tighten the saddle clamp and quick release properly before riding. The saddle and seat post cannot be twisted when the fixing screw is in place. Check with your dealer if you have any doubt.
3
H/bar stem height & angle adjustment procedure
Put it in correct position before you ride
Open handlebar quick release, rotate handlebar to your desired position and tighten the quick release securely.
Loose stem clamp bolt with 6mm Allen key, pull the quill to your desired height, and then tighten the clamp bolt. The Minimum Insertion mark of stem and seat post should NOT be visible.
Caution:
Warnings !
It is essential to thoroughly check that your bars and stem are tight and cannot be moved after you have made any adjustments. Please make sure all the quick release and bolt are probably tighten before your ride.
Folding Procedure
Each Halfway/Subway bicycle comes with a travel bag, so you can carry your folded bike in a convenient way.
step 1.
Align crank with the seat tube and fold open the pedal by pushing/ pulling the faces outward.
Safety button
step 3.
Slide safety button forward, then open the frame quick release.
step 4.
Fold the frame. Secure it in folded position with clip on front and rear hub.
5
UNFOLDING PROCEDURE
To unfold the new Halfway/Subway for riding, reverse the procedure. Make sure all quick releases for frame, seat post, handlebar and handlebar stem are fixed. Do not ride the bicycle before the pedals have been closed completely. [. . . ] Consult your dealer for help in determining your maintenance needs.
ride life. Giant and its symbol are trademarks of Giant Bicycle, Inc. All rights reserved. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIANT HALFWAY
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIANT HALFWAY will begin.