User manual GIANT DEFY TECHNICAL SERVICE V1.0

[. . . ] Technical Service Instructions For Press-Fit bottom bracket adapter (Version 1. 0) Congratulations on your purchase of a Giant TCR/Defy/ Avail Advanced Composite Technology series bicycle. [. . . ] Any modification will affect the bottom bracket interface and will void the warranty. Failure to follow these instructions may result in hidden damage to the composite frameset. Damage to the frameset may cause loss of structural integrity, which may result in serious personal injury. Only proper installation will bring out the best performance and comfort in your frameset. Since the installation of the Press-Fit BB adapter is a complicated task requiring training and experience, only Giant authorized dealers should complete the sophisticated process. Be sure to check the table below before selecting which BB adapter to use. If the BB adapter is not suitable, serious personal injury may result. BB Adapter Model SHIMANO ISMC7800P FSA BB-AL86 FSA BB90-CF86 Ceramic FSA BB90-CF86 SRAM BB CAMPAGNOLO Step 2: Installation of the front chainwheel/crank: Chainwheel/Crank Model SHIMANO HOLLOWTECH II FSA MEGAEXO Alloy Series FSA MEGAEXO Carbon Series FSA MEGAEXO Carbon Series SRAM GXP Series ULTRA TORQUE SERIES NOTE: Make sure to follow the installation instructions provided by the manufacturers of the chainwheel/crank. [. . . ] CAUTION Avoid scratching or damaging the frame/BB shell during the removal of the BB adapters Installation Step 1: Apply a neutral grease inside the frame's bottom bracket cups, then install the left and right-hand press-fit BB adapters: Left hand adapter Right hand adapter ! Warranty Please refer to the Giant Owner's Manual or visit our Web site: www. giant-bicycles. com for complete provisions of the warranty. Press-fit the adapters by tightening them in a vise, while applying pressure evenly to both sides so that they do not become tilted. © 2008 Giant Bicycle, Inc. [. . . ]