User manual GEONAUTE WS900

[. . . ] WS900 6/07/06 17:50 Page 1 WS900 6/07/06 17:50 Page 25 EN A1. MIN/MAX: displays the current, low, and high temperatures, humidity, and UV readings A4. HISTORY: displays the pressure and UV readings from the last 24 hours ALARM: activates and sets the alarm SNOOZE / LIGHT: engages the snooze alarm 8 minutes later and the backlighting. SELECT: changes fields CHANNEL: changes the displayed measurement channel °C/°F Control: changes temperature units. [. . . ] comfort levels Cloudy · Selecting unit of measurement: turn the°C/°F switch to the chosen position. · Selecting the remote sensor from which you wish to display information: press CHANNEL Rainy to alternately display information from the different sensors recognized by the station. The " indicates the number of the selected sensor. " icon Snowy · For alternate display of all connected sensors, hold down CHANNEL for 2 seconds. The data for NB : The night icon is displayed during the night, arbitrarily between 6:00 PM and 6:00 AM. NB : If the temperature measured on the remote sensor for channel 1 is lower than 2°C (35. 6 °F), the icon " " changes to icon " ". LOW/HIGH RECORDINGS Press MIN/MAXseveral times to display the current low/high recordings for the selected sensor. An audible signal wil sound to confirm that the memory has been erased. each sensor are displayed for 3 seconds. To terminate the automatic scanning, press CHANNEL once again, or press MIN/MAX. · · 35 36 EN This device is capable of detecting changes in local atmospheric pressure. Based on the gathered data, this device can forecast local weather for the next 12 to 24 hours. The accuracy of the weather predictions is 70 to 75%. Temperature/humidity displays WS900 6/07/06 17:51 Page 37 TEMPERATURE AND HUMIDITY TREND The trend curves are indicated beside the readings for temperature and current humidity level. Trend Increase Constant Decrease Backlighting Press SNOOZE-LIGHT to activate the backlighting for 8 seconds. EN 8 9 10 11 6 12 Re-initializating system Temperature Humidity Comfort level The comfort level indicates if the environment is pleasant, based on readings for temperature and current humidity level. Level Humid (WET) Comfortable (COM) Dry (DRY) Temperature All 20-25°C All Humidity >70% 40-70% <40% Re-initializing the functions of the device is accomplished using the RESET button. Press RESET when you change batteries, or any time the device does not function properly (for example, it doesn't establish a radio frequency connection with the sensor or the radio controlled clock). When you press RESET, all the settings return to their default value, and you lose all recorded information. · Barometer This device records fluctuations in atmospheric pressure in order to provide weather forecasts. The measurements of atmospheric pressure for the present and for the preceding 24 hours are recorded by the main device (indoors). 1 This information is indicated in the humidity field when the current reading is displayed. 2 3 Heat index The heat index communicates 4 warning levels at high temperatures. Category Danger Extreme Danger Danger Extreme caution Caution Temperature °C >54. 5 40. 5-54. 4 32. 2-40. 5 26. 6-32. 2 °F >130 105-130 90-105 80-90 4 5 7 To display the heat index: 1. If the temperature is below 26°C / 80°F, or the desired channel is not activated, the heat index displays "NA" 1. User number (for UV Mode) or hourly record for UV and atmospheric pressure readings 12. Altitude/atmospheric pressure/ UVI reading 37 38 WS900 6/07/06 17:51 Page 39 Barometer display field UV indication (optional) This weather station is compatible with a WS90. UV sensor (sold separately; not included in the pack). This sensor provides the following information: Record of the ultra-violet index for 10 hours. Automatic calculation of acceptable exposure time to UV based on preset user profiles (maximum of 4 users). Press SELECT to enter the barometer field; the " " appears in the barometer field. Then press MODE to display the UV icon and the data. · Press SELECT to enter the barometer field. · If necessary, press MODE to change from display of UV indices to barometric pressure display. [. . . ] You are not within range of the antenna in Frankfurt (around 1, 000 km). The antenna icon, in the bottom left-hand corner of the screen, is not displayed. Set the time manually as indicated in the relevant section. 6 You cannot set the time. 1. Deactivate the radio control by selecting the time/date field by pressing SELECT several times and then pressing DOWN for 2 seconds (to reactivate this function press UP for 2 seconds. ) Important !!!: For any problems other than those described above, or for any problems you cannot resolve alone, place the station and the sensors on a table and carry out the initializing procedure STEP by STEP as described in the initialization procedure. [. . . ]