User manual GENIUS WIRELESS TRIO RACER

[. . . ] Software Installation: Install the driver first before you install Wireless Trio Racer to the system. The Wheel will not support the vibration function, if the driver is not installed. [. . . ] The Turbo speed will be adjusted cyclically from 2->4->8->16->2 Hz, each time the Key_10/START button is pressed. pS3 Mode Select_Key Start_Key PS_Key Turbo Speed Setting Key Remapping Setting Turbo+ Key10/Start Key_10/START + Turbo Switch to PS Position Key_9 Key_10 Key_Fn at PS mode Active Direction Function for Game Setup Page: 1. Press Key9-Select button for two seconds, the Turbo LED will light to show the activation of "Direction function". The following will act as each direction controlling: Button 5=UP; Button 6 = DOWN; Wheel Turn to right = RIGHT; Wheel Turn to left = LEFT. Press Key9-Select two seconds again to release the Direction function. Key Mapping Functions For certain racing games, the brake and acceleration function may be not relate to the BRAKE pedal or ACCELERATION pedal. With the help of Key Mapping, you can duplicate the function to your favor buttons. note that Wireless Trio Racer can only set the KeyMapping function at buttons 5/6/7/8 , Brake Pedal and Acceleration pedal. Press your favor TARGET button which you would like to copy that function to it. Then, press the SOURCE button to duplicate its function to the TARGET button to complete the procedure. the TURBO LED will turn off to indicate the function duplication is complete. Press the TARGET button which you would like to release that function. [. . . ] To save power, turn the power switch to OFF position whenever you do not want to play it. Antes de continuar as configuraes do game da OPO dentro do game, sempre leia com cuidado o manual do seu game para ajustar as melhores configuraes. [. . . ]