User manual GENIUS P7533

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] Close the battery/SD memory card cover lock firmly. NOTE Be sure to format an SD memory card with this digital camera before using it. Refer to the section "Formatting an SD Memory Card or Internal Memory" for further details. To prevent valuable data from being accidentally erased from an SD card, you can slide the write protect tab (on the side of the SD memory card) to "LOCK". To save, edit, or erase data on an SD memory card, you must unlock the card. To remove an SD memory card 1. Press lightly on the edge of the memory card and it will eject. NOTE Memory cards may become hot during use; observe due caution when removing memory cards. -13- English Attaching the Camera Strap Attach the strap as shown in the illustration. LED Indicators Indicator Self-timer indicator LED indicator LED indicator Self-timer indicator Self-timer indicator State Blinking red On On Blinking red Blinking red Description/Activity The digital camera is powering up. The self-timer function is activated. GETTING STARTED Follow the steps below to set the date display style, current date and time. Turning the Power On/Off Load the batteries and insert an SD memory card before starting. To turn the camera on, slide the lens cover open until it clicks, uncovering the lens. To turn the camera off, slide the lens cover closed until it clicks, covering the lens. ON OFF NOTE The power is turned off automatically when the camera has not been operated for a fixed period of time. Refer to "Auto Off" in the Setup Menu -14- English for further details. Choosing the Screen Language Follow these steps to choose the desired language. Select the displayed language with the buttons, then press the OK button. To exit from the menu, press continuously the button. Setting the Date and Time Follow these steps to set the date display style, current date and time. Select the item's field with the adjust the value for the date and time with the / buttons. To exit from the menu, press continuously the Ex: In Camera Mode Ex: In Camera Mode -15- English Formatting an SD Memory Card or Internal Memory The term "Formatting" means preparing an "SD Memory Card" to record images; this process is also called "initialization". This utility formats the internal memory (or memory card) and erases all stored images and data. To exit from the menu, press continuously the button. Ex: In Camera Mode NOTE When you format an SD memory card, be aware that all existing data will be permanently erased. To format the internal memory, do not insert a memory card into the camera. Formatting is an irreversible action and data cannot be recovered at a later time. An SD memory card having any problem cannot be properly formatted. -16- English PHOTOGRAPHY MODE Shooting Images - The Basics 1. Compose the image on the monitor screen so that the main subject is within the focus frame. Press the shutter button to capture the image. A 0. 3 01/01/2007 00:00 NOTE A The actual captured image appears to be larger than the one on the LCD after the image is captured. Setting Image Resolution and Quality As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in memory, or on a memory card. Higher resolution and higher quality images provide finer detail but cause the images' file size to be larger. 0. 3 02/05/2006 08:03 To change image resolution or image quality, follow these steps: 1. [. . . ] iPhoto may automatically launch. ) Step 2: Download images or video clips When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the "Removable disk" ("untitled" or "unlabeled" disk on a Macintosh) to your computer hard drive. Windows Open the "removable disk" and double click on the DCIM / DSCIM folder to open it to find more folders. Select the desired still images or video clips and then choose "Copy" from the "Edit" menu. Open the destination location (folder) and choose "Paste" from the "Edit" menu. [. . . ]