User manual GENIUS P535

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] In the [ (PLAY)] mode, press to select [THUMBNAIL] with the , , or (PLAY)] mode with , , or , then button, then press the OK button. Use or to choose the desired number of thumbnail images to be displayed, then press the OK button. button. (PLAY)] mode, press the W / Four or nine thumbnail images are displayed simultaneously. Use , , or to select the image to be displayed at regular size, then press the OK button to display the selected image on full screen. -33- English NOTE A[ ] or [ ] icon will be displayed in a thumbnail display Slideshow Display The slide show function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. In the [ (PLAY)] mode, press to select [SLIDE SHOW] with , , or , , or (PLAY)] , then press the OK , then press the OK button. Use or to set the slideshow interval, then press the OK button. The slide show starts. The video clips are displayed in the first frame image, and not played back. To stop slide show, press the OK button. Resizing an Image You can follow the steps below to set an image to one of the four sizes. You can change the image size of a captured image to one of the following sizes: 2560x1920 pixel, 2048x1536 pixel, 1280x960 pixel and 640x480 pixel. Use or to select the desired setting, then press the OK button to confirm. to select [RESIZE] with the , , or button, then press the (PLAY)] mode, use or to select the desired image you want to MOVIE MODE Recording Video Clips 1. , , or , then press the OK NOTE The function of optical zoom (3x) can be activated before you start to record video clips. Each time you press the button, the display changes in the following order: Standard Display Simplified Display. -35- English Playing Back Video Clips 1. In the [ (PLAY)] mode, use or to go (PLAY)] mode with , , or , then through the images until the video clip you want to play back is displayed. Use SCN to start fast forward playback. NOTE The zoom function cannot be activated while playing the video clips back. To playback the video clips on the computer, we recommend you to use Windows Media Player 9. 0 (WMP 9. 0). You can download WMP version from the website at www. microsoft. com. PLAY MODE - ADVANCED FUNCTIONS Playing Back Images/Video Clips on TV You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital still camera, then turn all connected devices off. -36- English 1. Match the docking connectors and carefully insert the camera until it fits in place. The method of operation is the same as playing back still images and video clips on the digital still camera. Rotating Images in the Display This function lets you rotate images so that the images are played back with the correct orientation. Press (PLAY)] mode, use or or to display the image you want to rotate. [. . . ] * ON/OFF FORMAT Erases all images and reformats the SD card loaded in your camera. Refer to section in this manual titled "Formatting an SD Memory Card or Internal Memory" for further details. * YES/NO SLEEP Allows you to adjust the time delay for power savings. If no operation is performed for a specific period of time, the status of LCD monitor will turn into idle mode (also known as power save mode) and the LCD monitor will turn off. [. . . ]