User manual GENIUS METALSTRIKE FF

[. . . ] This connector provides Center & Subwoofer (LFE) sound source output, you can connect one set of active speaker. （＊Value 5. 1 only） The 15-pin female connector can be connected to any IBM PC compatible joystick with a 15-pin D-shell connector and MIDI instrument. There are two sets of pins, one for Mitsumi standard and the other for Sony standard. *A MIDI adapter is required to connect a MIDI instrument to the sound card. The MIDI adapter can be purchased from your local computer store and is connected to the MIDI/GAME port. B. [. . . ] Click “Sound Maker Value 4. 1 ” or “Sound Maker Value 5. 1 ” button after entering software control panel. Click “Install Device Driver and Applications” button. The wizard will lead you to finish all the installation. If Auto Run can’t be used with your computer, please refer to each Windows as follows, Installing the Sound Card Driver under Windows® 98/98SE 1. After hardware installation has been finished, power up your computer and wait for Windows® 95/98/98SE to boot up. The message box will show “Add New Hardware Wizard” and “This Wizard searches for new drivers for PCI Multimedia Audio Device”. Insert the Multimedia Software CD-ROM into your CD-ROM drive or DVD-ROM drive. Key in the drive and path for drivers/application installation program; for example, “D:\SMVALUE4. 1\SETUP. EXE” or “D:\SMVALUE5. 1\SETUP. EXE”. Click “OK” to start the applications/driver installation procedure, and follow the on-screen instructions to finish the installation. When all the application software has been installed, please restart your computer. Select “Unlisted or Updated Driver” in “List of Drivers” then click “OK”. Specify the drive and the path where NT drivers are in (such as D:\Smvalue4. 1\Win_NT40\Drv or D:\Smvalue5. 1\Win_NT40\Drv). Now, you have already installed the PCI Audio driver under Microsoft® Windows NT® 4. 0 6 PCI Sound Card－Sound Maker Value 4. 1/5. 1 Sound Card successfully. If you want to install the Windows applications, continue the following steps: 12. Key in drive and path for Windows NT® application installation program; for example, “D:\Smvalue4. 1\Win_NT40\App\Setup. exe” or “D:\Smvalue5. 1\Win_NT40\App\Setup. exe”. Click “OK” to start the installation procedures, and follow the on-screen instructions to finish the installation. When all of application software has been installed, shut down the Windows NT® system and then reboot your system. Uninstalling the Sound card Driver for Windows NT® 4. 0 1. Select "Audio for C-Media PCI Device" then press "Remove" button. Shut down NT system and reboot. Installing the Sound Card Driver under Linux 1. [. . . ] Shut down NT system and reboot. Installing the Sound Card Driver under Linux 1. Please check the detail steps from folder “D:\Smvalue4. 1\Linux\Readme file” or “D:\Smvalue5. 1\Linux\Readme file”. Installing the Sound Card Driver under DOS 1. Insert the Multimedia Software into your CD-ROM drive or DVD-ROM drive. [. . . ]