User manual GENIUS KIDSBALL

[. . . ] kd-896 KidsBall Create a Rainbow World KYE SYSTEMS CORP. Frame 41 Table of Contents Frame 2 Table of Contents Installing KidsBall 1 Installing the Driver 1 Using the KidsBall Control Panel 4 Removing the KidsBall Driver 5 Deutsch 6 Français 11 Español 16 Italiano 21 Portuguese 26 Russian 31 Nederland 36 Frame 42 Installing KidsBall file:///D|/KidsBall/html/kd-896. htm (1 of 7) [10/12/1999 10:37:50 AM] kd-896 Frame 3 Installing KidsBall Follow these steps to install KidsBall. Important: Remember to turn off your computer before installing KidsBall. Using KidsBall with Another Mouse KidsBall can work with another mouse device on the same computer. [. . . ] Insert the backup copy of the KidsBall driver diskette to floppy drive A (or B). From the Program Manager File menu, select Run and press Enter. file:///D|/KidsBall/html/kd-896. htm (3 of 7) [10/12/1999 10:37:50 AM] kd-896 4. Restart Windows 3. x to activate KidsBall. r The installation procedures for Windows 3. x are similar to Windows 95. Installing the DOS Driver After you install the KidsBall driver in Windows 95/3. x, the DOS driver of KidsBall will be installed in your AUTOEXEC. BAT file automatically. If you didn't install the KidsBall driver under Windows 95/3. x, insert the backup copy of the KidsBall diskette to floppy drive A (or B). Under the C:\prompt, type: C:\A: (or B:) A:\GMOUSE <Enter> (or B:\GMOUSE <Enter>) KidsBall installed on COM2: (Port 3F8, IRQ 04) Absolute Coordinate enabled. The driver automatically detects KidsBall, and a message shows that the DOS KidsBall driver has been installed. The GMOUSE. COM driver also supports the "Parameters" setting. /P -- Use Mouse Port (PS/2) for three buttons. file:///D|/KidsBall/html/kd-896. htm (4 of 7) [10/12/1999 10:37:50 AM] kd-896 /P2 -- Use Mouse Port (PS/2) for two buttons. -- Display help. Frame 46 GTEST Program This program lets you test the basic functions of KidsBall. Under the same drive and directory, type: GTEST Enter The test screen appears as shown below. To check KidsBall, move the cursor, click the mouse buttons, or draw a line to test KidsBall. Using the KidsBall Control Panel After you have installed the KidsBall driver in Windows 95/3. x, you can now use KidsBall. And for all programs, you can customize the right button to make it work the way you want it to. You just open the KidsBall Control Panel in the KidsBall Group or the Control Panel for Windows 95/3. x and double click on "KidsBall". Here's how to use the KidsBall Control Panel: 1. file:///D|/KidsBall/html/kd-896. htm (5 of 7) [10/12/1999 10:37:50 AM] kd-896 The left button does the same operation as the left mouse button. [. . . ] If you want to remove the KidsBall driver, click the right button on My Computer and select Properties. If you install the KidsBall driver which runs Setup from the KidsBall driver diskette, then select one of the options below to remove the driver. Removing the DOS Driver Type GMOUSE/U Enter , to remove the driver. Frame 51 file:///D|/KidsBall/html/kd-896. htm (7 of 7) [10/12/1999 10:37:50 AM] [. . . ]