User manual GENIUS HR6XSLIM

[. . . ] User's Guide Genius Scanner All trademarks and brand names mentioned in this publication are property of their respective owners. No portion of this document may be reproduced without permission. Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Conventions of this Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click the CLOSE button to close the Genius TWAIN window and you may review the scanned image under the folder of INBOX in PageManager software. Genius Scanner 11 From image-editing software -1. Place a picture headfirst and face down onto the scanner glass and then close the document cover. ImageFolio, and click on FILE, ACQUIRE, and then choose ACQUIRE to open the Genius TWAIN window. To proceed scanning task, click the SCAN button from Genius TWAIN window. When you complete the scanning task, click the CLOSE button to close the Genius TWAIN window, and you may review the scanned image in Presto!ImageFolio software. Scanning the Films Your scanner provides an easier and quicker way to scan transparent materials such as slides, positive or negative film. With the special designed Negative and Positive Film Holder supplied with your scanner, you may have a very different experience in proceeding scanning task. Read the following instructions carefully to learn how to scan the films. Installing the Transparency Adapter The transparency adapter is located on the underside of the scanner lid and is a necessary tool when scanning slides or negatives. The transparency adapter already comes installed in your scanner model. To activate it, simply plug it in as shown below. Genius Scanner 12 Using the Negative and Positive Film Holders 1. Hold the top of the mat, and gently pull it upward until it is separated from the document cover. 2. Insert a filmstrip or a 120/220 film into the proper compartment on the film holder. Adjust the position of the inserted film, so that the desired image appears in the view window. 120/220 film : 6x7 cm / 6x8 cm / 6x9 cm a. b. c. d. Genius Scanner 13 3. Place the film holder on the scanner glass, and align the positioning aids of the film holder to fit into the indentations at the upper right-hand or left-hand corner of the scanner glass. Ensure that the ready-to-be-scanned film compartment must be positioned on the center of the scanner glass, and the arrow sign of the particular film compartment must be in alignment with the inverse-arrow sign carved on the scanner housing. b. c. d. Note: If you are scanning 35mm slides, place the film holder on the scanner first, Attention and then place the slides in the holder. 4. Select POSITIVE FILM or NEGATIVE FILM as the scan source by clicking the SCAN SOURCE button on the Genius TWAIN window. Select 35mm, 120/220 (6x6 cm) film, or 120/220 (6x9 cm) film as the scan size. Click on the SCAN IMAGE icon to start scanning the image. Important Notes about Scanning Film !Do not cover any small compartment below each arrow sign on the film holder because that it is necessary for calibration. !Always replace the reflective document mat onto the scanner's document cover after you finish scanning the films. Genius Scanner 14 ! [. . . ] If you transfer this product to another user, warranty service is available to that user for the remainder of the warranty period. We warrant that this machine will be in good working order and will conform to its functional descriptions in the documentation provided. Upon provision of proof of purchase, replacement parts assume the remaining warranty of the parts they replace. Before presenting this product for warranty service, you must remove all programs, data and removable storage media. [. . . ]