User manual GENIUS HD500

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] In Movie/Picture Record Mode, press OK to switch to record menu screen. Use Tele/Wide Button to select White Balance, then press OK to switch to the White Balance submenu. Display screen W/B Option OK Button Multi-Snap (Camera Mode Only) With the camera set to Multi-Snap Mode, you can take five continuous pictures. In Movie/Picture Record Mode, press OK to switch to record menu screen. -30- English 2. Use Tele/Wide Button to select Multi-Snap, then press OK to switch to the Multi-Snap submenu. Press Picture shutter Button to take five continuous pictures. Display screen Multi-Snap Option OK Button Back Light Mode With the camera set to backlight Mode, you can take shots when bright light is behind the subject. In Movie/Picture Record Mode, press OK to switch to record menu screen. Use Tele/Wide Button to select Backlight, then press OK to switch to the Backlight submenu. Press OK to validate the setting and exit. Display screen Backlight Option -31- English OK Button Date Printing (Camera Mode Only) To enable Date Printing: 1. In Movie/Picture Record Mode, press OK to switch to record menu screen. Use Tele/Wide Button to select Date Printing, then press OK to switch to the Date Printing submenu. Display screen Date Printing Option OK Button NOTE Date will be shown on the printed picture once date printing is enabled. Night Mode Use Night Mode for night scenes or low light conditions. Display screen Night Mode Option -32- English OK Button NOTE To avoid blurry pictures, place the camera on a flat, steady surface, or use a tripod. Voice mode To enable voice recording: 1. In Movie/Picture Record Mode, press OK to switch to record menu screen. Choose OK option to enable voice recording and press OK to validate the setting and exit. Display screen Voice Option OK Button Effect Setting There are four modes: Normal, Black/White, Classic and Negative. In Movie/Picture Record Mode, press OK to switch to record menu screen. Display screen Setting Menu The Setting submenu contains options for configuring your camera set up. In Movie/Picture Record Mode, press OK to switch to record menu screen. Use Right/Left Buttons to move to Setting option, then the Setting Submenu will appear on the screen. Display screen Setting Option Sound (operation sound) Time Setting Format Memory TV System Language Default Setting Sound Enable or disable the Keypad tone and operation sound by using the Tele/Wide Button, then press OK to validate the setting. Display screen Sound Option -34- English OK Button Time Setting 1. [. . . ] If the problem persists, contact your local reseller or service center. Power Supply Symptom The power does not come on. Cause The battery is not loaded. The digital video camera was left unattended and unused, so auto power off cuts it off. Turn the power back on. The power cuts out during use. The power does not go off. Many images are being captured in dark places inside, requiring flash. [. . . ]