User manual GENIUS G512

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Flash Mode Description The flash fires automatically according to the ambient conditions. button repeatedly until the desired flash mode appears. Auto Flash -18- English The flash emits a precursor-flash before the main flash fires. This Red-eye reduction causes the pupil in the human eye to constrict, reducing the red-eye phenomenon. Select this mode when taking images of people and animals in low-light conditions. Select this mode for recording images with high contrast (backlighting) and deep shadows. Select this mode when taking images in a place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. Red-eye Reduction Fill Flash on Flash off PLAYBACK MODE In playback mode, you can view, magnify, delete images, play video clips, or run a slide show. Playback mode also provides a thumbnail image display, allowing you to quickly scan for the image you want. Viewing Images 1. View your images using the To view the previous image, press the To view the next image, press the Press the OK button to rotating image. NOTE If there are no images stored in memory, the " monitor. " message will appear on the LCD -19- English Zoom Playback While reviewing your images, you may enlarge a selected portion of an image. To view the different portion of the enlarged image, press the / / / button. To return to the regular display (cancel playback zoom) from 4X-enlarged status, press the ZOOM button again. Select the image that you want to view using the Displaying Thumbnail Images This function allows you to view nine thumbnail images on the LCD monitor simultaneously so that you can quickly scan for a particular image. Nine thumbnail images appear on the LCD monitor (assuming there are nine or more images in memory). To view a full-size image, selecting it by using the / / / button, and then press the Display button and the selected image will be displayed in the full LCD frame. -20- English Auto Play The Auto Play function enables you to playback your images back automatically in sequential order as a slide show. This is a very useful and entertaining feature for reviewing recorded images and for presentations. button, then click The auto play starts, displaying your images on the LCD monitor, one by one, at the NOTE You can adjust the slideshow display interval from 1 to 10 seconds ([1 SEC], [3 SEC], [10 SEC], [off]). Deleting Images You can delete an image or video clip or all images and video clips at once by using the Erase function in the Playback menu. To delete one image or video clip: 1. " message will be button to select [YES], and press the To delete all images or video clips (at once): 1. The " button to playback mode. " message appears because all images and video clips have been deleted. button. To exit from this screen, press Play/Pause NOTE To delete images or videos stored in internal memory, do not insert a memory card into the camera. Otherwise, you will delete the images or video clips stored on the memory card. Protect This function can prevent the image files stored in the camera from being erased accidentally. Press the Play/Pause Cancel button. button, then click MENU button. Cancel the set up in the Protect mode -22- English You can just protect only one image Use the One / / / button to select the image you Use the or or Use the to select want to protect Protect One All Protect all of the images stored in the camera Press Click Menu button mode Unprotect All Use the or Use the / to select Protect Press Click Menu button to select Protect mode to select Protect All Disable the "Protect" function on the protected file Press Click Menu button mode Use the or Use the / to select Protect to select Unprotect All Use the or / / to select You can select several images to protect Press MENU button Protect mode Selected Use the want to protect / Use the / Press to select Selected button to select the image you button to select or cancel the selection. Press OK button to confirm. Setting the DPOF DPOF is a standard for recording printing information directly on the SD memory cards and other media. [. . . ] Press MENU button to select Setup -36- English NOTE The camera will perform normally when you enable the TV-Out function. The only difference is the location to show the images, and the image information will be from the LCD Monitor to the video output device's display. While using the camera, after you connect the video cable to the camera, the images will be no longer shown on the LCD Monitor. If you want to restore the display status on the LCD Monitor, please disconnect the video cable from the camera. FREQUENCY The camera supports different lighting frequencies: 50Hz and 60Hz. [. . . ]